Transmitter
Output power:
4205: +5 to +20 dBm
(3 to 100 milliwatts)
4305: +5 to +20 dBm
(3 to 100 milliwatts)
Frequency band:
5.725 to 5.825
GHz
Channel bandwidth:
50 MHz
Receiver
Receive level
threshold (10-6 BER): -78 dBm
Maximum receive
level: -30 dBm
Nominal receive
level: -50 dBm
Frequency range:
5.725 to 5.825
GHz
Channel bandwidth:
50 MHz
Frequency plan
4205:
Plan A center
frequencies: TX
5.747 GHz, RX 5.827 GHz
Plan B center
frequencies: TX
5.827 GHz, RX 5.747 GHz
4305:
Plan A center
frequencies: TX
5.750 GHz, RX 5.800 GHz
Plan B center
frequencies: TX
5.800 GHz, RX 5.750 GHz
RF Interface
Antenna connector:
female type-N
Impedance:
50 ohms
Digital Interface
Capacity:
full DS-3
Data rate:
44.736 Mbps
Interface type:
DS-3
Connectors:
Female BNC, 75 ohms
Line code:
B3ZS
Line buildout:
0 to 225 feet
(DSX-3), 225 to 450 feet
DS-3 monitoring:
M13 or C-bit
parity
Alarms:
AIS, LOS, LOF, RAI,
Idle signal
Loopbacks:
Line and link
User Interface
Front panel:
Status LEDS
Diagnostics:
Line loopback
button, self-test LED
Test points:
RSSI, transmit
power
Alarm contacts:
RF carrier
loss, normally open and closed
Terminal Interface
Function:
Menu-driven user
interface, monitor and control of local and remote end of
link, password protection, event history
Emulation:
VT100
Data rate:
9600 bps
Physical
interface:
Female DB25
Electrical
interface:
RS-232
Mechanical and
Environmental
Operating
temperature:
-25ºC to 65ºC
Width:
16.75" (for 19" EIA
rackmounting – hardware included for both 19 and 23-inch bays)
Height:
1.75" (1U)
Depth:
9.5"
Humidity:
95%, non-condensing
Weight:
7 lbs.
Power
Input voltage:
21-63 vDC,
either polarity referenced to ground
Power consumption:
25 Watts,
maximum
DC connector:
2-pin plug in
|