Transmitter

Output power: +5 to +20 dBm (3 to 100 milliwatts)
Frequency band: 5.725 to 5.850 GHz ISM band
Channel bandwidth: 50 MHz

Receiver

Receive level threshold (10-6 BER): -78 dBm
Maximum receive level: -30 dBm
Nominal receive level: -55 dBm
Frequency range: 5.725 to 5.850 GHz ISM band
Channel bandwidth: 50 MHz

Frequency plan

Plan A center frequencies: TX 5.747 GHz, RX 5.827 GHz
Plan B center frequencies: TX 5.827 GHz, RX 5.747 GHz

RF Interface

Antenna connector: female type-N
Impedance: 50 ohms

User Interface

Front panel: Status LEDS
Diagnostics: Self-test LED, LAN/WAN activity LEDS
Test points: RSSI
Alarm contacts: RF carrier loss,
normally open and closed

Supported Features

Layer 2 Switching and MAC Bridging
Ethernet Interfaces
Four auto-sensing 10/100BaseT Ethernet ports
Maximum frame size: 1536 bytes (802.3 compliant)
Auto MDI/MDIX support on all interfaces
Back-pressure flow control for
half-duplex interfaces
Pause-frame flow control for
full-duplex interfaces

Terminal Interface

Function: Menu-driven user interface, monitor and
control of local and remote end of link, password
protection, event history, Ethernet statistics
Emulation: VT100
Data rate: 9600 bps
Physical interface: Female DB25
Electrical interface: RS-232

Mechanical and Environmental

Operating temperature: -25�C to 65�C
Width: 17.22" (for 19" EIA rackmounting � hardware
accommodates both 19 and 23-inch bays)
Height: 1.72" (1U)
Depth: 9.34"
Humidity: 95%, non-condensing
Weight: 7 lbs.

Power

Input voltage: 21-60 VDC, either polarity referenced to ground
Power consumption: 23 Watts, maximum
DC connector: 2-pin plug in