Pulse Home Page for Data Communications and Wide Area Networking

Home
Search

About Us
Contact Us

Products
Services
Solutions
Support


Wireless Bridge
Point to Point
-------------
SENCITY LINK 60Ghz
 

Specifications

 

 

General Information  
Transmission capacity: 100 Mbps @ 800 m (2600 ft) - full duplex
Interface: 100 Base-TX
Range*: up to 800 m (2600 ft)
Availability: up to 99.999%
Latency: < 50 µs + distance latency (1 µs / 300 m)
Modulation format: QPSK
Air interface accordig to: FCC part 15 subpart C, 15.255

 

Transmitter  
RF output EIRP: + 40 dBm
Spurious emission: FCC part 15.255

 

Receiver  
Threshold: - 60 dBm @10-6 BER
Max. input: - 20 dBm

 

Antenna  
Gain: + 38 dBi
Beam width: < 3°
Polarisation: linear 45° slant
Corsage adjust range: ± 45° azimuth, ± 45° elevation

 

Mechanical Data  
Dimensions: 160 × 160 × 80 mm (6.3" × 6.3" × 3.1")
Weight: 3500 g (7.7 pound)

 

Power Supply  
Standard: Power over Ethernet
according to IEEE 802.3af
Voltage: 48 V DC
Power consumption: 11 W, IEEE 802.3af compliant

 

Environmental Data  
Working temperature**: - 45 °C ... + 55 °C  (- 49 °F ... + 131 °F)
Wind load: 160 km/h (100 mph) operating,
200 km/h (125 mph) survival

 

Connection  
Cable length: up to 100 m (300 ft)
Termination indoor: RJ45, IEEE 802.3af compliant
Signal wires: CAT 5e

 

Network Management  
Management protocol: SNMP / web browser-based configuration
IP address assignment: fixed or DHCP

* The range depends on the climat zone and the requested availability
** Only if the unit is powered up; for storage use: - 30 °C ... + 55 °C (- 22 °F ... + 131 °F)


 

 

 

Pulse was one of the top 500 fastest growing companies in the USA ! Wireless Modem and Router Products
Toll Free Email Pulse Catalog International


Copyright © 2008 Pulse, Inc. All rights reserved
Privacy Legal Site-map  :  HelpLogin