System

Capacity

QuickBridge 20 18 Mbps aggregate throughput

QuickBridge 20 +T1/E1 12 Mbps aggregate data throughput, 3 Mbps/4 Mbps dedicated T1/E1

System Gain 124 dB

Maximum Distance 6 miles/10 Km line of sight

Transmit Output Power +16 dBm max; +15 dBm typical

Antenna Integrated LHCP; 20dBi, 10º

azimuth by 10º elevation

Maximum Receive Level -20 dBm error free

Latency 2.5 msec typical, 5 msec maximum

Access Method Time Division Duplex

Modulation Technique QPSK with equalization and FEC

Security Key 16 Character Security ID (Alphanumeric), authentication and PN transmission scrambling

Compliance US: FCC Part 15.247 ISM;

Canada: IC RSS 210

Contact Proxim for additional countries

Data Interface

Ethernet Interface 10/100BaseT via AC power adapter

Connector RJ-45 female modular plug w/weather-protected shell

Cable Type CAT5

Compliance IEEE 802.3

Digital Line Interface

T1 Digital Interface Optional Channel via indoor external T1 multiplexer

Connector RJ-45 female modular jack

Compliance ANSI T1.403

E1 Digital Interface Optional Channel via indoor external E1 multiplexer

Connector Balanced RJ-45 female modular jack, 8 pin

Compliance ITU-T Rec. G.703

Management

Local, Remote Access QuickBridge Utility (Java-based GUI) for discovery, status, and configuration

Software Upgradeable Over-the-air reprogramming

Security 2-level password access on Utility

Power/Environment

QuickBridge

AC Power Adapter included, 110 VAC or 220 VAC, 450mA; Output: 24V DC, 1 Amp

DC Power (to unit) +18 to +28 VDC

Power Connector Power over Ethernet CAT5 cable RJ-45 connector

Operational Temperature -33º to 55º C

Storage Temperature -55º to 85º C

Humidity 5-100% condensing

Altitude Up to 10,000 ft

Safety UL 1950, EN60950

Wind Loading 115 mph

T1/E1 Multiplexer

AC Power Built-in AC power supply, 110/220 VAC, 1 Amp

Operational Temperature 0º to 50º C

Humidity Up to 90% non-condensing

Physical Unit

QuickBridge Unit

Size (WxHxD) 10.5x10.5x7 inches

26.5x26.5x14.4 cm

Weight 10lbs /4.5kg

Mounting (Installation) Pole Mount 1.5-2.75"/ 3.08 – 6.98 cm O.D.

(hardware included for 1.75"/ 4.4 cm O.D.)

T1/E1 Multiplexer

Size (WxHxD) 8.4x1.7x9.7 inches

21.34x4.38x24.64 cm

Weight 2.7 lbs/1.25 kg

Shipping Configuration

2 QuickBridge Radio Units, 2 sets mounting hardware, 2 power adapters, 2 sets 50 meter Cat5 cable, 2 sets user documentation & utilities on CD-Rom, 2 external T1/E1 multiplexers on applicable SKUs

Frequency Channel

Channel Plan Frequency

3A 5742.19 MHz

3B 5775.39 MHz

3C 5808.59 MHz

4A 5743.85 MHz

4B 5764.60 MHz

4C 5785.35 MHz

4D 5806.10 MHz

Ordering Information

48001-001 Tsunami QuickBridge 20 Kit - 110 VAC

48001-002 Tsunami QuickBridge 20 Kit - 110/220 VAC

48001-011 Tsunami QuickBridge 20 +T1 Kit - 110 VAC

48001-012 Tsunami QuickBridge 20 +E1 Kit - 110/220 VAC