Wimax
-------------
Libra MAX-RBS

Features

• Full line-speed operation

• Rugged all-in-one ODU design

• Low latency solution

• 10/100 Ethernet Port

• minimal indoor footprint simplifies deployment

• IEEE 802.16 WiMAX compliant

• Dual N-type female antenna connectors

• Part of the award winning Libra MAX platform

• Supports Ring and Mesh topologies

• Repeat as sector or point-to point

• Layer 2 bridging for simple
  passthough of all traffic including
  VLAN and SCADA

Description

Rugged All-in-One Design

MAX-RBS is designed for deployment in difficult and remote locations. All of the electronics are located in a rugged metal die cast enclosure. The enclose is rated for outdoor operation in temperatures from -50� C to +60� C, and all environmental
conditions. The unit can be attached to a wall, pole or tower using the included monting hardware. Power is supplied to the MAX-RBS using PoE over an outdoor rated Ethernet cable.

Integrated Management Tools

Libra MAX-RBS runs a lite version of the Libra MAX Network Management System (NMS). This NMS gives operators all of the commands required to set up and deploy the MAX-RBS, without overloading the CPU with uncessary configurations that are
only available in a full Libra MAX indoor base station unit.

Topologies

PTP Repeater provides range extensions for remote subscriber stations and allows protection paths for critical services.
Sector Extension enables the expansion of coverage areas through using the MAX‑RBS point-to-multipoint feature.
Ring and Mesh topologies can be established for backahul approaching carrier-grade availability at the system
level. Jumbo Sector - Combined with a single Libra MAX-16 Base Station at the central office, MAX-RBS enables hub and spoke architecture, allowing very large WiMAX coverage areas and very high subscriber capacity and throughput.