Wireless Modem
Point to Point
-------------
FibeAir
1500i/1528i

Features

Licensed 6-38Ghz Frequencies
100-633mbps Bandwidth
Supports E1, T1, E3, T3, OC-3, STM-1, STM-4, OC-12
Supports Fast and Gigabit Ethernet
Supports 16, 32, 64, 128 and 256 QAM modulations
Point to Point, Ring, Star and Cascaded support
Support for 1+1 redundancy mode
Automatic Transmit Power Control
SNMP element manager
Compliant with ETSI, FCC, ITU-T, ITU-R and IEEE standards and frequency plans, for operation worldwide

Description

FibeAir™ product family of broadband wireless systems supports multiple capacities, frequencies, modulation schemes and configurations for various network requirements, using the same hardware and state-of-the-art technology.

Combining spectral efficiency, hardware efficiency, modularity, flexibility and upgradeability in a single, compact, and cost-effective 1U system, the FibeAir family is a breakthrough in the wireless point-to-point market.

This innovative family of products presents an easy method of “on the fly” wireless network upgrades in accordance with network expansion requirements. These optimized as-you-grow capacity capabilities of the FibeAir family are leveraging operators and service providers capital and operating expenses.

Frequencies and Modulations - FibeAir family supports the complete range of frequencies of 6 to 38 GHz and software configurable modulation schemes of 16, 32, 64, 128 and 256 QAM with versatile 28-56 MHz bandwidths.

Capacities - FibeAir radios are upgradeable for capacities of 100 to 622 Mbps, using the same 1U IDU, supporting 1+0, 2+0, 4+0 (with optional XPIC, Cross Polarization Interference Canceller mechanism), 2+0 East-West, 1+1 HSB, and 1+1 HSB with space or frequency diversity mode. Point-to-point, ring, star, and cascaded chain topologies are all supported.

Topologies and Configurations - Each indoor unit (IDU) can host up to two carriers, each delivering 100, 112, 116, 155 or 311 Mbps, optimizing the solution for every network topology and configuration. The two independent, hot-swappable carriers can be used for protection, diversity or double capacity.

High spectral efficiency is ensured by choosing the same frequency for double the capacity, due to the usage of both carriers for vertical and horizontal polarizations, implemented by a built-in XPIC mechanism.

East-West configurations for ring and cascaded topologies are also possible using the same method, whereby one carrier is directed to the east and the other to the west, reducing equipment and resource requirements in each node, which, in turn, increases network efficiency.

FibeAir can seamlessly integrate into any SDH/SONET, IP and ATM network, while supporting a wide variety of IP + TDM interfaces, including nxE1/T1, nxE3/DS3, nxSTM-1/OC-3, STM-4/OC-12, nxFE, and GigE. This enables network designers to meet growing market needs, including integration of current and next generation technologies, using the same radio equipment.