|
The TSU 600� and TSU 600e� are modular, full-featured
T1/FT1 Integrated Access Devices (IADs) designed to support a
wide range of end-user applications. Through the six
expansion slots on the rear of the TSU 600/600e, the user has
complete flexibility in the type of DTE interfaces required
for the T1 application. By supporting up to 24 DTE interfaces,
the TSU 600(e) provides the same functionality as a
traditional channel bank, while providing a small form factor
and end-user oriented features. The TSU 600(e) provides
complete monitoring and control of internal functions with
embedded Simple Network Management Protocol (SNMP) provided
through a SLIP interface. The TSU 600e has the added benefit
of an integrated 10BaseT ethernet interface.
Support for future growth, through the unit�s six expansion
slots, is a key feature of the TSU 600(e). The ability to
combine many types of plug-in and plug-on modules provides
extensive combinations of voice and data interfaces. Several
data modules are available for single and dual-port access to
Frame Relay, DDS or Basic Rate ISDN services provided over T1
facilities. Voice modules are also easily integrated, allowing
access to analog voice circuits or PBX connections.
As a fully functional T1 Multiplexer, the TSU 600(e)
supports all mixed-mode networking applications providing
termination for circuits containing voice, data and video
applications.
Configuration and management of the TSU 600(e) is available
through a variety of methods. The TSU 600(e) supports SNMP
with gets, sets and traps functionality through a built-in
agent. ADTRAN� Enterprise MIBs support management for the TSU
600(e) and all installed expansion modules. For access to SNMP
features, the TSU 600e has both a 10BaseT ethernet and a SLIP
(EIA-232) connection, while the TSU 600 has a SLIP interface
only. In addition to SNMP, the unit utilizes the management
capabilities found in optional software products from ADTRAN
including N-FORM (600e only) and T-Watch PRO.
|
Email
