WAN and Datacomm Products from Pulse Supply

Channel
Bank
------------
P32mxi

Specifications

THE P32MXi HAS BEEN DISCONTINUED AS OF 12/2007

PLEASE EMAIL OR CALL YOUR LOCAL PULSE REP FOR ALTERNATIVES.

General P32mxi System Capabilities

Dual T1/E1 Network Interfaces
Up to 32 total Analog (VF) Interfaces
Long Loop (18,000 ft./1900 ohm) FXS Interfaces
T1/E1 Conversion (with A to Mu-law Conversion)
DID (DPT/DPO) Support Integrated CSU (T1)
Autosensing 10/100 Base-T Ethernet
Integrated Battery Charger
Integrated TCP/IP Router
Voice over Broadband/Voice over ATM (AAL5/AAL2)
Integrated Stateful Firewall
Virtual Private Network Support (via Tunneling)
Full Digital Crossconnect (92 DS0 maximum)
Signaling Conversion: FX to E&M, FX to FX, E&M to R2 Digital
Graphical User Interface (Local and Remote)
SNMPv2 Management
Supports Caller ID / CLASS Features
True Sine Wave Ringing Generator
Integrated V.35 Interface (Nx56K/64K)
Remote Battery Testing
Remote Software Upgrades
Eight-hour Battery Backup
Frame Relay/PPP/HDLC Support
Voice over IP (MGCP)
Packet Voice Compression and Echo Cancellation
Dynamic Bandwidth Allocation
(VoATM/VoIP) QoS Support

Intelligent Call Routing Features

Inbound/Outbound Call Routing
Station-to-Station Calling
Call Forwarding
Remote Table Programming
Digit Deletion/Digit Insertion
Call Blocking
"Ringdown" Circuit Using Switched Networks
DNIS and DID RoutingDigit Translation
Call Transfer
Local Number Portability
Support Route Diversity/Redundancy
911 Override
Inbound/Outbound Call Statistics

Advanced Channel Bank Features

Timer-based Answer/Disconnect Supervision
Voice Activity Detection Answer/Disconnect
Supervision Selectable Tones and Cadence (150 countries)
TR-08 Remote Terminal Emulation

NETWORK INTERFACE MODULES (2 per chassis)

� T1 (D4, ESF and TR-08) interface supports FX and E&M Wink/Immediate signaling

� E1 interface (75 and 120 ohm) supports E&M Wink/Immediate and R2 Digital Signaling

� Future SDSL/HDSL2/G.SHDSL interface

ANALOG INTERFACE MODULES (8 per chassis)

� Quad FXS/DPO Long Loop interface (18,000 ft. CSA); FCC approved for outside plant or interoffice use

� Quad FXS/DPO Short Loop interface (3,000 ft.)

� Quad FXO/DPT interfaces

ROUTER/ATM/VoIP/ETHERNET (RAVE) MODULE

� 10/100 Base-T Ethernet Port

� TCP/IP Router and Bridge

� RIPv1/v2 and Static Routing Protocols

� Frame Relay/PPP/HDLC

� DHCP Client/Server

� NAT/PAT and NAPT (IP Masquerading)

� PAP/CHAP support

� IGMP Proxy support

� VPN Services: PPTP and L2TP

� Port Filtering and Access Policy Definition

� Stateful Firewall with Denial-of-Service (DOS) Attack

Detection, real-time logging and blacklisting

� Future Radius support

ATM/VOICE OVER ATM

� ATM AAL2/AAL 5 voice and data with QoS prioritization

� Jetstream/BLES/VMOA compliant

VOICE OVER IP

� MGCP 1.0 support

� Future H.323 and SIP

VOICE COMPRESSION (with DSP Modules)

� G.711 PCM, G.726 ADPCM, G.729A CS-ACELP

� G.165 and G.168 Echo Cancellation (up to 32ms)

SUPPORTED NETWORK STANDARDS

ATM: ILMI 4.0; I.363.2 CPCS, I.366.1 & .2 SSCS; UNI 3.0, 3.1 & 4.0; I.610 OAM; LANE; RFC 1483/ 1577/1755 IP over ATM (IPoA); RFC 2684 MPoA; RFC 2364 PPPoA; PPPoE Relay; af-vmoa-0145

IP: RFC 791/1058/1191/1723/1812; RFC 2663 (NAT/NAPT); RFC 1661/1570/2364 (PPP); RFC 1334 (PAP); RFC 1994 (CHAP); RFC 2637 (PPTP); RFC 1058/1723/2453 (RIP); RFC 854 (Telnet); RFC 1350 (TFTP)

Frame Relay: FRF 1.1/12; Q.933 Annex A; RFC 2427

T1: ANSI T1.403/AT&T 54016, 62411 & 43801

E1: G.703, G.704, G.731, G.732, G.775, G.962, O.162, Q.421, Q.422, TBR 012 and TBR 013

MANAGEMENT

� Configured by the StarCAD 9000 GUI (Windows only)

� SNMPv2 Management via SLIP (craft port), Network Interface (via Frame Relay or ATM), or Ethernet

SUPPORTED MIBs

RFC 1155/11571213/1901 (SNMP core); RFC 1493 (Bridge); RFC 1471/ 1472/1473/1474 (PPP); ILMI; RFC 2515 (ATM); LANE; RFC 2665; RFC 2863 (IF); RFC 1406 (T1/E1); Custom System MIB

CLOCKING

Internal or Loop timing from either network module

POWER

� AC or DC with integrated battery charger and battery

testing

� AC 95-135 VAC, 50/60 Hz

� DC input -42 to -60 VDC

� Maximum Power 90W

� Remote battery test function

� Automatic "Float" & "Equalize" for longer battery life

� Remote monitoring of internal temperature and power supply voltages

� True sine wave ringing generator