Pulse Home Page for Data Communications and Wide Area Networking

Home
Search

About Us
Contact Us

Products
Services
Solutions
Support


Fiber Optic Modem
-------------
OPTI-3
OPTI-3

Specifications

 

Total Access OPTI-3 Wallmount Chassis (1184001L1) with two OPTI-3 Controller Cards (1184002L1)

Space-saving 2U high unit - 3.5 inches H, 6.5 inches W, 12 inches D

Total Access OPTI-3 Rackmount Chassis (1184003L1) with two OPTI-3 Controller Cards (1184002L1)

Space-saving 1U high unit - 1.75 inches H, 13.5 inches W, 12 inches D
Chassis fits both 19-inch and 23-inch racks

Technical Considerations

All 75 ohm BNC connectors, alarm contacts, power connections, network connector, BITS timing and Ethernet are accessed on the rear of the chassis
Standard SC fiber optic connectors interface on card and route the optical cable through the faceplate of the card
Operating range – Wallmount –40ºC to +50ºC, Rackmount –40ºC to +65ºC
Approximately 8.5 W power draw per card
Meets the GR-253 standard optical interface requirement of –8 dBm to –15 dBm, typical –11 dBm
Uses two single mode fibers per card with SC connectors

 

Pulse was one of the top 500 fastest growing companies in the USA ! Fiber Optics Equipment
Toll Free Email Pulse Catalog International


Copyright © 2008 Pulse, Inc. All rights reserved
Privacy Legal Site-map  :  Help :  Login