Pulse Home Page for Data Communications and Wide Area Networking

Home
Search

About Us
Contact Us

Products
Services
Solutions
Support


Back
Multiplexer Equipment Multiplexer Equipment
DVMUX-3 DV-MUX3

Fractional=

Low Cost adaptive TDM Multiplexer, integrating one or two compressed voice/fax channels together with one synchronous data channel onto a dial-up modem or digital link. Link Speed up to 256kbps. AC or DC power supply.

STM-8/16/24 HS STM-8/16/24 HS

Fractional=

The STM high speed statistical multiplexers, integrate up to 24 asynchronous channels onto a single synchronous link. Channel data rates are from 75 bps up to 19.2 kbps. The synchronous composite link operates at up to 64 kbps. AC power Supply.

Kilomux 2100 and 2104 Kilomux 2100/2104

Fractional=

Compact, modular Kilomux time-division multiplexer supports data, voice, fax and LAN traffic over one or two main Fractional E1/T1 links at rates from 9.6 to 1536 kbps each. Wide range of optional cards. AC and DC power supply.

Megaplex 2100/2104 Megaplex 2100/2104

E1/T1=

Modular E1/T1 access multiplexer for TDM, Frame Relay and IP networks. Supports data, voice, fax and LAN traffic over one or two main links, at rates from 9.6 to 2048 kbps each. Wide range of optional cards. AC and DC power Supply.

TSU 600e

TSU 600e

T1=

Modular T1 access multiplexer for TDM networks. Supports data, voice, fax and LAN traffic over one or two main links. Wide range of optional cards. AC and DC power Supply.

Optimux XL Optimux XL

E3=

A high performance, manageable E3 multiplexer.  Converts up to (16) E1's, Data and/or Ethernet over a 34mbps fiber or coax link. Full Redundancy for power and link available. Modular and Non-modular chassis options. Single or Multi-Mode. T3/T1 Model also available. AC or DC power Supply.

MX-2800 MX 2800

T3=

Modular T3 access multiplexer for TDM networks. Supports (28) T1's or (16) E1's. Optional Redundancy for Power, T3 and T1s. Modem and Telnet available. AC and DC power Supply. STS-1 Interface available.
MX2820 High Density T3 Multiplexer

MX 2820

T3=

Similar to the MX2800, but high density. Supports up to (9) incoming T3/DS-3s and outputs up to 252 T1's. Supports E1s as well. Up to 81 M13 Multiplexers when stacked with cooling in a cabinet or shelf.  IP manageable. AC and DC power Supply.

R-STM-1E R-STM-1E

STM-1=

A high density Coax or fiber optic (STM-1) multiplexer. Supports up to (63) E1, (3) E3 or (3) T3  ports over a STM-1 interface. Single Mode. AC or DC power Supply.

Atlas 890

Atlas 890

E1/T1/T3=

A high density Multiplexer supporting TDM and/or Frame Relay up to 64 ports. Optional modules include T3, T1, E1, PRI,  Nx56/64 Data, Ethernet, Inverse Multiplexing and analog/digital voice. AC or DC power Supply.

Net Performers

Net Performers

E1/T1=

A high performance line of proven Frame Relay/TDM Multiplexers. Scalable Chassis for Voice and Data. T1, E1, RS-232, V.35, X.21, RS-530, Analog and Digital Voice. Optional Satellite, ATM and IP software. AC or DC power Supply.

P32mxi Channel Bank P32mxi

E1/T1=

A low cost E1 or T1 Multiplexer/Channel Bank. Built in V.35 port. Optional advanced answer/disconnect supervision and Ethernet LAN module. Supports digital ITU-R2 and DTMF. Perfect for VoIP termination of Digital T1 and E1 ports. AC or DC Power Supply.

Pulse was one of the top 500 fastest growing companies in the USA ! Multiplexer Equipment
Toll Free Email Pulse Catalog International


Copyright © 2008 Pulse, Inc. All rights reserved
Privacy Legal Site-map  :  Help :  Login