Pulse Home Page for Data Communications and Wide Area Networking

Home
Search

About Us
Contact Us
News


Products
Services
Solutions
Support


Brands
ATM
Termination
-------------
LA-110
LA-110

Specifications


NETWORK INTERFACE

ATM
ATM supports AAL1 (CES and DB-CES), AAL2 and AAL5
ATM QoS Per VC traffic shaping
ATM services: CBR, VBR, UBR
F5 OAM cells as per I.610

SHDSL uplink


SHDSL per ITU-T G.991.2
Line code: TC-PAM
Connector: RJ-45
Data rates: n x 64 kbps (n≥3), up to 2.312 Mbps (2-wire)
Handshake protocol: G994.1

USER INTERFACES


� E1 Port Compliance:
ITU-T Rec. G.703, G.704,
G.706, G.732, G.823

Framing:

256N (no MF, CCS)
256N (no MF, CCS) with CRC4
256S (TS16 MF, CAS)
256S (TS16 MF, CAS) with CRC4
Line rate: 2.048 Mbps
Line code: HDB3
Line impedance: 120Ω, balanced 75Ω, unbalanced
Receive level: 0 to -30 dB
Transmit level: Balanced, �3V �10%
Unbalanced, �2.37V �10%
Jitter: ITU-T G.823
Connectors:Balanced, RJ-48C, 8-pin Unbalanced, two BNC


� Data Ports
One modular data port supports
Frame Relay, or transparent over ATM AAL1 and AAL5.
Data rates: 64, 128, 192, 256, 384, 448, 512, 768, 896, 1024, 1344, 1536, 1792, and 2048 kbps
Interface and connectors:
V.35: 34-pin, female (via adapter cable)
RS-530: 25-pin D-type, female
RS-449/V.36: 37-pin D-type
female (via adapter cable)
X.21: 15-pin D-type, female (via adapter cable)
Clock mode: DCE

� FXS Port
4 FXS ports
EIA RS-464 Loop start
WINK start (reverse polarity) for direct connection to a 2-wire
telephone


� ISDN Port
4 ISDN S0 ports
Compliance: ETS 300012, I.430, NTT, 5ESS, DMS-100, NI1
Bit rate: 192 kbps
Line coding: Pseudo-ternary
Line termination: 100 �5%
Connector: RJ-45


� LAN Interface
Port: 10/100BaseT
Routing: Static, RIP I, II in compliance with IEEE 802.3
DHCP Relay/Server
NAT/PAT and Single IP
PPPoE or PPPoA


GENERAL


� Timing Modes
Transmit timing from: Network derived Sub E1 Adaptive clock NTR


� Management
SNMP, Telnet and ILMI (inband and out-of-band)


� Supervisory Ports
Interface devices: DCE port: ASCII terminal
Interface: V.24/RS-232, async
Baud rate: 115.2 kbps auto-baud detection
Connectors: RJ-45

� Standards
ATMF: UNI 3.1, VMOA-0145, CES 2.0 (AF-VTOA-0078), DBCES (AF-VTOA-0085)
ITU-T: I.361, I.362, I.363, I.364, I.365.1, I.413, I.555, I.610 FRF: FRF.5, FRF.8 RFC: RFC 2684, RFC 2427
Router RFC: RFC 2364,
RFC 2131, RFC 2132,
RFC 3022, RFC 1058


� Indicators
PWR (green) � Lights up when power is On
LAN (green) � Indicates transmission occurs for the LAN port
WAN � Indicates the operating status of the Network port
Green � Synchronization occurs
Red � No synchronization
Blinking � Synchronization in process


� Physical
Height: 43.7 mm / 1.7 in
Width: 23.7 cm / 9.3 in
Depth: 17.0 cm / 6.7 in
Weight: 0.58 kg / 1.4 lb


� Power
External Power Supply (included with unit)
100 to 230 VAC (�10%),
10 to 15W
47 to 63 Hz


� Environment
Temperature: 0�50�C / 32�122�F
Humidity: up to 90%,
non-condensing

 

Pulse was one of the top 500 fastest growing companies in the USA ! ATM Termination Equipment
Toll Free Email Pulse Catalog International


Copyright © 2010 Pulse, Inc. All rights reserved
Privacy Legal Site-map  :  Help :  Login