Frame Relay
Access Device
-------------
IQ 710

Specifications

100 DLCIs monitored
56/64k, T1/FT1, and T1/FT1 + DSX-1 Frame Relay
Automatic LMI detection

T1 BPVs, CRCs, ES, SES, UAS, %AS, %EFSEC, Alarm, Errors
Telco loop test in progress

PVC state
Bytes Tx/Rx; frame Tx/Rx
Frames with BECN/FECN/DE
Max/Min/Avg frame size
Throughput/Bandwidth utilization per PVC
Lost frames/sequence check
Continuous PVC delay measurement
Max/Min/Avg end-to-end PVC delay
Burst rate
Congested seconds

Byte Tx/Rx; frame Tx/Rx
Throughput/Utilization
Frame size violations (invalid frames)
CRC errors/abort frames
Non-octet aligned frames

LMI state/state changes
Polls in; Responses in Timeouts/Link integrity frames
Polls with protocol error

Monitor protocols on port and PVC
Protocols supported: IP/IPX, ARP, SNA, other Top talkers

Utilization/Throughput per application
Application response time
Visited URL addresses
Overall network efficiency
Top talkers and listeners
Utilization histogram

PVC loopback w/ test pattern/sequence check
PVC round trip delay

CSU loopbacks

56/64k Network Interface Module
T1/FT1 Network Interface Module
T1/FT1 + DSX-1 Network Interface Module

V.35 Winchester M block female
56 to 1.536, Nx56 or Nx64 Kbps

ADTRAN N-Form web-based network management suite
Local and remote VT100 terminal via the Control port
Remote configuration via Frame Relay network connection
Telnet
Front panel
Embedded Java-based web application

ADTRAN N-Form web-based network management suite
In-band access through shared or dedicated PVC
VT100 control port
10BaseT Ethernet interface

Operating Temperature: 0� to 50� C, (32� to 122�F)

Storage Temperature: -20� to 70� C, (-4� to 158�F)

Relative Humidity: Up to 95%, non-condensing

Dimensions: 10" D x 8" W x 2.75" H

Weight: 4.5 lbs

Power: 115 vAC, 60 Hz, 7W

Two 8-pin to 8-pin modular cables CD