Pulse Home Page for Data Communications and Wide Area Networking

Home
Search

About Us
Contact Us

Products
Services
Solutions
Support


E3 CSU/DSU
-------------
E3 IDSU
E3-IDSU

Specifications


E3 Network Interface

Line Rate E3 (34.368 Mbps)

Framing ITU-T G.751

Line Coding

HDB3

Input Signal

ITU-T G.703

Output Signal

ITU-T G.703

Electrical

75 ohm coax Connector BNC or 1.6/ 5.6 DIN (via adapter)

Timing Sources

Looped or internal clock

 

T3 Network Interface

Line Rate DS3 (44.736 Mbps)
Framing M13/C-bit parity (selectable)

Input Signal

+6.2 dBm to -11.7 dBm

Output Signal

DSX-3 or DS-3 high (selectable)

Impedance 75 ohm coax

Connector BNC socket

Timing Sources

Looped or internal clock

Monitoring Monitoring jacks with 20 dB attenuation

Standards T1.102, T1.404, TR-TRS-000499

 

Data Port selectable

HSSI

Data Rate (E3)

34 Mbps: or 1 to 24 Mbps in .5M increments

Data Rate (T3)

44 Mbps: or 1 to 35 Mbps in .5M increments

Electrical HSSI (10k series ECL, VEE + -5VDC)

Physical 50 pin SCSI-2 socket

V.35/EIA-530 selectable

Data Rate 1 to 8 Mbps in .5M increments

Electrical V.35 or RS422/423 (V.11)

Physical DB25 socket

 

Management

Options ASCII Terminal

SNMP
Modem
Other NMS

Configuration

Non-volatile RAM

Control Ports

DCE

DTE

Electrical EIA-232D (V.24)

Mechanical

EIA 561 (8 pin modular)

Data Rates 1.2, 2.4, 4.8, 9.6 kbps asynchronous

Performance Monitoring

Error Counts

Last 24 hours in 15 minute increments

Error Events

Event errors
Errored seconds
Bursty seconds
Severely errored seconds
Unavailable seconds
% available seconds
% error free seconds

Alarm Status

Loss of Signal (LOS)
Out of Frame (OOF)
Alarm Indication (AIS)
Yellow Alarm (YEL)
Test/active

Alarms

Alarm Reports

Local/remote message
Auto alarm dial out
Alarm history

Messages Info

Time and date stamp
Set or clear stamp
Alarm type
Unit address
Unit ID (user defined)

Alarm Types

Loss of Signal (LOS)
Out of Frame (OOF)
Alarm Indication (AIS)
Excessive error rate
Equipment failure
Alarms cleared

Alarm Relay

Normally open, normally closed, and common

Diagnostics

Loopbacks

Line, local, payload, compatible with T1.107 and T1.107a

Regulatory

Safety NRTL listed to UL 1459

CSA 22.2 No. 950 with 0.7
EN 60950*

EMI/EMC FCC Part 15

EN 55022*
EN 50082-1*

* International version only

 

Environmental

Operating 0° C to 50° C

Shipping -20° C to 70° C

Rel. Humidity

5% to 95%, non-condensing

Power

AC Option 85 to 265 VAC (47 to 63 Hz)

24W nom, 30W max

DC Option 36 to 75 VDC

22W nom, 25W max
screw terminals

Physical

Dimensions

1.70" H, 16.75" W, 11.50" D
4.3 cm, 42.5 cm, 29.2 cm
Mounting 19" or 23" rack mount or desktop
Weight 12 lbs; 5.4 kg

Ordering Guide

Description Model No.

DataSMART T3/E3 IDSU, AC 15951
DataSMART T3/E3 IDSU, DC 15952

 

Pulse was one of the top 500 fastest growing companies in the USA ! CSU/DSU Termination Equipment
Toll Free Email Pulse Catalog International


Copyright © 2008 Pulse, Inc. All rights reserved
Privacy Legal Site-map  :  Help :  Login