Pulse Home Page for Data Communications and Wide Area Networking

Home
Search

About Us
Contact Us

Products
Services
Solutions
Support


Digital Cross
Connect
-------------
Atlas 830

Specifications


Network Interface

Two built-in T1/DSX-1/PRI ports;

Full or Fractional E1/T1 support

Connects to network or user equipment; software configurable

Built-in CSU

Signaling ISDN D Channel, Robbed-Bit: FXS and loop start, DID conversion between T1 and ISDN

E1/PRA Line Rate: 2.048 Mbps

T1/PRI Line Rate: 1.544 Mbps

E1/PRA Physical Interface: DB-15, BNC

T1/PRI Physical Interface: RJ-48C, modular 8-pin

E1/PRA Framing: NFAS, FAS, TS16 MF and CRC-4

T1/PRI Framing: D4(SF)/ESF

E1/PRA Line Code: HDB3

T1/PRI Line Code: AMI/B8ZS

E1/PRA Input Signal: 0 to –30 dB

T1/PRI Input Signal: 0 to –36 dB

LAN Features

Built-in 10/100BaseT Ethernet port

IP Router Features

Integral IP router supports RIP v1, RIP v2, ICMP, ARP, IARP, UDP Relay

WAN Features

Frame Relay with RFC 1490 encapsulation

PPP

Link Management

ANSI T1.617-D (Annex D)

ITU-T Q.933-A (Annex A)

LMI (group of four)

Automatic link management protocol discovery

Congestion Control

FECN/BECN, Discard Eligible (DE)

Quality of Service

User configurable DLCI priorities

G.723.1 voice compression (with optional module)

ISDN Switch Compatibility

EURO ISDN, Lucent 4ESS/5ESS, Nortel DMS-100/250, NI-1 and NI-2

Management Features

Configuration, Alarms, Statistics, and Tests via Telnet

Trap/Alarm messages using SNMP

SNMP, MIB II (RFC1213), DS-1 MIB (RFC1406) and Enterprise MIBs

N-Form software provides extensive management including front/rear panel images, trap/alarm messages, and customizable reports

Supports local and remote loopbacks, QRSS test patterns

Alarm contacts

Frame Relay Performance Stats

TX/RX packets, state changes, signaling errors, TX/RX full status, TX/RX link integrity status, FECN/BECN count, DE count

Min/Max/Avg delay, dropped packets

Frame Relay Capacity

992 PVCs per system

7900 packets per second

Physical

Dimensions (cm): 44.5 W x 31.8 D x 14.0 H

Weight: 5.6 kg

Power: 90/240 VAC; 50/60 Hz; 50 W (base unit); 200 W (max); -48VDC

Operation Temperature: 0°C to 45°C

Storage Temperature: -40°C to 70°C

Agency Approvals

CE Mark (AC only)

UL EN60950, CUL

FCC Part 15 (Class A) and FCC Part 68

Product Includes

ADTRAN utilities software (includes TFTP server,

VT100 client, and Telnet); two RJ-48C straight through cables; one RJ-48C crossover cable; one RJ-48-to-DB-15 adapter; user manual; and 19" mounting brackets.

 

 

Pulse was one of the top 500 fastest growing companies in the USA ! Digital Cross Connect Equipment
Toll Free Email Pulse Catalog International


Copyright © 2008 Pulse, Inc. All rights reserved
Privacy Legal Site-map  :  Help :  Login