T1/PRI NEtwork Interface module
 One
built-in T1/DSX-1/PRI port
Full or fractional T1 support
Connects with network or user equipment under soft-ware
control
Built-in CSU
Signaling ISDN D Channel, Robbed-Bit: E&M, FXS, FXO, ground
and loop start, DID conversion between T1 and ISDN
Line Rate: 1.544 Mbps +/-75 bps
Physical Interface: RJ-48C, modular 8-pin
Framing: D4(SF)/ESF
Line Code: AMI/B8ZS
Input Signal: 0 to �36 dB
Line Length: DS-1: 6,000 ft (24 AWG), DSX-1: 655 ft
LAN Features
Built-in 10/100BaseT Ethernet port
IP Router Features
RIP
V1, RIP V2, ICMP, ARP, IARP, UDP Relay, OSPF
Frame Relay
RFC
1490 encapsulation
Link Management
ANSI T1.617-D (Annex D)
ITU-T
Q.933-A (Annex A)
LMI
(Group of four)
Automatic link management protocol discovery
Congestion Control
FECN/BECN, Discard Eligible (DE)
Quality of Service
User configurable DLCI priorities
G.723.1 voice compression
Switch Compatibility
Lucent 4ESS/5ESS, Nortel DMS-100/250, GTD-5, NI-1 and NI-2
management features
SNMP, MIB II (RFC1213), DS-1 MIB (RFC1406) and Enterprise
Loopbacks, QRSS test patterns
Alarm contacts
Frame Relay Performance Stats
TX/RX packets, state changes, signaling errors, TX/RX full
status, TX/RX link integrity status, FECN/BECN count, DE count
Min/Max/Avg delay, dropped packets
Frame Relay Capacity
300
PVCs per system
5500 packets per second
Physical
Dimensions: 17.08" W, 11.67" D, 3.47" H
Environment
Operating Temperature: 0� to +45�C
Storage: -20� to +70�C (-4� to 158�F)
Relative Humidity: Up to 95%, non-condensing
Power
AC
Power: 90/240 VAC, 50/60Hz
Agency Approvals
UL
1950, CUL
FCC
Part 15 (Class A) and FCC Part 68
Product Includes
ATLAS System CD (Includes ADTRAN Utilities TFTP
Server, VT100 Client, Telnet; System Manual; System MIBS;
Application Notes; Module Quick Start Guides; ADOBE Acrobat
Reader), one 15 ft RJ-48C straight-through cable, one RJ-48 to
DB-9 adapter, one RJ-48 to DB-25 adapter, one 6 ft straight
cable
|
Email
