 |
 |
 |
 |

Using symmetrical VDSL technology, ASM-60 operates at
rates up to 10 Mbps over 4-wire lines. The ASM-60 extends the
range of digital equipment up to 2 km (1.2 miles) over 24 AWG
(0.5 mm) 4-wire copper cable. This eliminates the need for
optical cable in the Last Mile (Local Loop) or in the campus
network environment.
The ASM-60 compensates for line impairments and mixed cabling
by using advanced equalization, adaptive filtering, echo
cancellation technology and QAM line coding.
Setup, control and monitoring of status and diagnostic
information can be performed using an ASCII terminal connected
to the async control port.
The ASM-60 is available as a standalone unit which can be
mounted in a standard 19" rack using special hardware. Two
ASM-60 units can be mounted side-by-side.
The ASM-61 (not shown) does 2-wire lines.
|
 |
 |