H.323/SIP/SBC=

Quintum’s Tenor Call Relay acts as a Session Border Controller and allows multiple gateways to share a single endpoint or IP address, even behind a firewall/NAT. Provides segmentation for service provider security so one side can't see the other. Allows additional bandwidth savings for Tenors and non Quintum gateways via Packetsaver. Can also serve as a High Performance GateKeeper with LRQ. Up to 720 simultaneous calls. AC Powered.

H.323/SIP=

The Quintum Tenor VoIP Call Routing Server II provides CLECs, ILECs, ISPs, and next generation service providers with scalable centralized network routing, policy enforcement, and administration. Supports ip to 720k BHCA. The VoIP Advanced Call Routing Server provides enhanced network-wide routing flexibility, including QoS-based routing, least-cost routing and source based routing.

Tenor Call Routing Server HC

H.323/SIP=

The Quintum Tenor VoIP Call Routing Server HMC provides all the features of the Tenor Call Routing Server II with much higher call handling transcations. Supports up to 1,440K BHCA for CLECs, ILECs, ISPs, and next generation service providers with scalable centralized network routing, policy enforcement, and administration. The VoIP Advanced Call Routing Server provides enhanced network-wide routing flexibility, including QoS-based routing, least-cost routing and source based routing.

Tenor Remote Manager Session Server

H.323/SIP=

The Remote Management Session Server resides either on the public IP network, or within the DMZ behind a firewall, and upon request, sets up a secure management channel between the configuration and management platform, and a Tenor Switch that is securely located behind a NAT firewall, with either a static or dynamic IP address. Used with Tenor VoIP Gateways.