VoIP
Termination
-------------
Tenor BX

Specifications

CALL MANAGEMENT FEATURES

Automatic call type detection: Voice/Modem/Fax
Trunk group support
Public and private dial plan support
User programmable dial plan support
Forced IP routing and IP port mapping
PSTN pass-through support for calls to toll-free, local, and special service numbers (emergency service, etc.)
Automatic appending and stripping of digits to dialed numbers
Call Detail Records
Least cost routing with external Quintum VoIP Call Routing Server*

TECHNICAL SPECIFICATIONS

Telephony Specifications
Voice algorithms: G.723.1a, G.729ab, G.711
Auto codec negotiation
FAX support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
Modem over IP
Choice of 2, 4 or 8 BRI S/T ports
MultiPath VoIP Switch or VoIP Gateway configurations
Ports individually programmable to NT or TE configuration
Supports point-to-point or point-to-multipoint
Standard RJ-45 connectors
Coding: A law or -law
Enhanced (Carrier Grade) echo cancellation: ITU Rec. G.168, up to 128 mSecs tail size
Signaling protocols: Net 3 ETSI EuroISDN (TBR3), AS/ACIF S031 (Australia), New Zealand Net3 (TNZ), QSIG
VoIP to circuit, and circuit to circuit (Tandem/TDM) switching

IP Network Specifications
LAN interface: 1 Fast Ethernet port (10/100 Base-T)
Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
QoS Support: IP TOS, DiffServ Code Point

VoIP Network Specifications
H.323 v.3 Gateway and Integrated Gatekeeper
SIP User Agent (RFC3261 compliant endpoint)
SIP Back-to-Back User Agent (B2BUA)**
SIP RFC2833 In-band DTMF Signaling
SIP Refer Method support
IVR/RADIUS server support for AAA with integrated multilingual IVR
Adaptive Voice Activity Detection (VAD) with comfort noise generation (CNG)
Adaptive jitter buffer
Packet loss compensation
NATAccess
Security: IP filtering
Up to 16 simultaneous VoIP calls

Configuration/Management
Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors
Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring, and CDR monitoring
SNMPv2 Agent
Command Line Interface (CLI)

Dimensions (1U High Chassis)
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm x H 4.5cm x D 27.6cm
Maximum weight: 8.25 lbs. (3.75kg)
AC Power: 100-240 Volts AC, 50/60 Hz, 35 watts
Operating temperature: 40 - 104 F (5 - 40 C)
Operating humidity: 20% - 80% non-condensing
Telco: TBR3, AS/ACIF S031
EMC: EN55022, EN55024, EN61000-3-2, EN61000-3-3
Safety: UL60950, EN60950, AS/NZS60950



The Tenor BX is designed as a MultiPath Gateway for PABX and/or PSTN termination, and is not intended for direct connection to ISDN telephones.

* Quintum products purchased separately.
** Not supported in initial software release