 |
|
|
|
The Tenor Digital series gives
multi-location enterprises an easy, cost-effective way to
capitalize on the power of Voice over IP (VoIP).
With its MultiPath architecture, the Tenor connects to the
data network through a 10/100 Ethernet interface, and to the
enterprise and public voice network through a T1, E1, or PRI
interface. From this position, the Tenor employs its
patent-pending SelectNet™ technology to monitor calls for
jitter, packet loss, and latency, and can transparently switch
mid-call to the voice network whenever conditions demand.
With this unique switching intelligence, the Tenor makes
VoIP both easy and risk-free.
More intelligence means greater flexibility.
With its MultiPath Call Routing, the Tenor can intelligently
route calls between the PBX, the PSTN, and the IP network, to
achieve the best combination of cost and quality. The Tenor
can also route calls over IP to reduce costs, and then
transparently ”hop off“ to the PSTN, to reach off-net
locations. No other VoIP
solution can match this flexibility.
More intelligence means easier installation.
With its MultiPath architecture, the Tenor is the only VoIP
solution that can be installed without upgrades to the
existing voice or data networks.
More intelligence means greater reliability.
The Tenor is designed to pass calls through to the existing
voice network in the event of system malfunction—even a total
power failure.
More intelligence means less network congestion.
With its PacketSaver™ technology, the Tenor reduces bandwidth
consumption up to 50%, by combining voice packets from several
calls into a single packet to minimize packet overhead.
NATAccess™ intelligence means greater security.
The Tenor VoIP MultiPath Switch also features a unique
technology that allows it to operate behind NATenabled
firewalls. The innovative NATAccess™ solution overcomes the
problem of NAT firewalls not correctly translating internal IP
addresses into public addresses when a VoIP call is
established with an outside party.
|
|
|
Email
