VoIP
Termination
-------------
Tenor AF

Specifications

CALL MANAGEMENT FEATURES

Automatic call type detection: Voice/Modem/Fax
Answer and Disconnect Supervision
Trunk group support
Public and private dial plan support
User programmable dial plan support
Forced IP routing and IP port mapping
Automatic appending and stripping of digits to dialed numbers
Call Detail Records
Least Cost Routing with external Quintum VoIP Call Routing Server*
Type 1 Caller ID/Name support (Telcordia, ETSI, NTT and DTMF)

TECHNICAL SPECIFICATIONS

Telephony Specifications
Voice algorithms: G.723.1a, G.729ab, G.711
Auto codec negotiation
Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
Modem over IP
Choice of FXS or FXO configurations
Standard RJ-11 connectors
Loop Start, Reverse Battery, Battery Disconnect
Maximum Call Rate: 300 calls/hour

IP Network Specifications
LAN Interface: Fast Ethernet port (10/100 Base-T)
Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
DHCP Client
QoS Support: IP TOS, DiffServ
Coding: A law, υ law
Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize

VoIP Network Specifications
H.323 v.3 Gateway and Integrated Gatekeeper
SIP User Agent (RFC3261 compliant endpoint)
SIP Back-to-back User Agent (B2BUA)**
SIP RFC2833 In-band DTMF signaling
SIP Refer Method support
IVR/RADIUS server support for AAA with integrated multilingual IVR
Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
Adaptive Jitter Buffer
Packet Loss Compensation
NATAccess
Security: IP Filtering
Up to 8 simultaneous VoIP calls

Configuration/Management
Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors.
Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
SNMPv2 Agent
Command Line Interface

GENERAL SPECIFICATIONS

Dimensions (1U High Chassis)
W 8 1/4" x H 2" x D 7"
W 21cm x H 5.1cm x D 18.73cm
Maximum weight: 1.3 lbs. (0.6kg)
AC Power: 100-240 Volts AC, 50/60 Hz, 22 watts
Operating temperature: 40 - 104 F (5 - 40 C)
Operating humidity: 20% - 80% non-condensing
Telco: FCC Part 68, AS/ACIF S003, CS03, JATE AS/ACIFS002:2001
EMC: FCC Part 15 Class B, EN55022, EN55024, EN61000-2-3, EN61000-3-3, AS/NZS3260
Safety: UL60950, EN60950, AS/NZS60950



* Quintum product purchased separately.
** Not supported in initial software release.