Signaling Conversion
-------------
SP230

Specifications

STANDARDS CONFORMANCE

• R1 Q.310 �Q.331

• R2 Q.400 �Q.490

• DTMF BellCore TR-TSV-002275,Subsection 6.13

• SS7 BellCore TR-NWT-00246,ANSI
  T1.111a,T1.112,T1.113a,T1.114,
  T1.116,T1.234 �T1.236

• C7 ITU-T White Book:Q.767,Q.701 �
  Q.704,Q.705,Q.708,Q.709,Q.780 �
  Q.782,Q.784,Q.788

• ISDN-ETSI ETSI 300-102,Q.931,Q.921

• ISDN-NI2 BellCore TR-NWT-001268,
  TR-NWT-002343;Q.931,Q.921

AGENCY COMPLIANCE

• Safety EN 60950,European Safety (CE Mark)

• UL 1950 3rd Edition, U.S. Safety

• C22.2 No.950,Canadian Safety

• EMC EN 300 386-2:1997 EU EMC (CE Mark)

• Emissions FCC Part 15,Sub-part J, Class A

HARDWARE SPECIFICATIONS

Physical:

Height 10.5 in.(26.7 cm)
Width 19 in.(48.26 cm)
Depth 14 in.(35.6 cm)

Input:

Power -48 to -56 VDC

Environmental:

Temperature 32 � to 122 � F ((0 � to 50 � C))
Humidity Up to 95%non-condensing
Altitude Up to 10,000 ft.(3,048 m)

SYSTEM CAPACITY

Aggregate Cards:  Up to 13 per chassis
Interfaces:  Up to eight E1 or T1 trunks per Aggregate card; up to 104 full duplex trunks per chassis
Channels:  Up to 31 per trunk;up to 248 per Aggregate card; up to 3,224 per chassis
SS7/C7:  Four per AGC card
Signaling Links:  Eight per card set
Up to 52 per chassis

INTERFACE SPECIFICATIONS

Framing:

E1:G.732 or G.704
T1:D4 SF or D4ESF

Bit Rate:

E1:2,048 Mbps
T1:1.544 Mbps

Clocking:

E1:� 30 ppm internal
E1:�100 ppm external
T1:�30 ppm internal
T1:�150 ppm external

Impedance:

E1:120 ohm balanced
E1:75 ohm unbalanced
T1:100 ohm balanced

Coding:

E1:AMI or HDB3
T1:AMI or B8ZS

Alarms:

E1:Loss of carrier signal, multi-frame carrier signal, sync; alarm
indication signal (AIS); receipt of remote alarm; receipt of multi-frame remote alarm

T1:Loss of carrier signal; loss of frame; receipt of alarm indication
signal (AIS); receipt of remote alarm Diagnostics E1/T1:signaling state report, digit report

Performance:

E1:G.703,G.704,G.732,G.823
T1:ATT Pub.62411 encore networks develops signaling converters for R2, MFC, c7, ansi ss7, c5 and ISDN Pri. fastcomm develops signaling converters for R2, MFC, c7, ansi ss7, c5 and ISDN Pri.  This includes the SP-201, SP-230, SP-201sa.