- Integrates multiple T1
and Ethernet channels over a single link
- Transmission over
fiber optic cable
- Supports multimode
fiber, single mode fiber and single mode over single
fiber (WDM)
- Laser diode option
- Range up to 60 km (36
miles)
- Conforms to ITU G.703,
ANSI T1.102, G.742, G.751, G.823, G.956
- Optional second fiber
optic link provides automatic backup
- Optional redundant
power supply
- Management using ASCII
terminal or SNMP management station
- Compact, 1U high
enclosure
OP-XLT1/*/R/#+/D
Multiplexer with built-in
Ethernet port.
Note: All
channel modules should be ordered separately (see
below).
| * |
Specify power
supply
AC for 110-230 VAC
48 for -48 VDC
24 for -24 VDC |
| R |
Specify
R for second redundant power supply (same
type as first) |
| #+ |
Specify
Link interface
(# for connector type, followed by + for optical
wavelength) |
|
# |
ST for ST
type connector
SC for SC type connector
FC for FC type connector |
|
+ |
85 for 850
nm, multimode
13 for 1300 nm, single mode
13L for 1300 nm, single mode, laser diode
15L for 1550 nm, single mode, laser diode
SF1 for transmit 1300 nm, receive 1550 nm
SF2 for transmit 1550 nm, receive 1300 nm |
Note: for
single fiber connection (WDM) one of the devices has to
be ordered with SF1 interface and the other with SF2
interface.
D Specify D for
second redundant link (same type as first link)
Channel Modules
OP-XL-M/4T1 for 4
x T1
OP-XL-M/ETH for
10BaseT Ethernet
|
