OP-XLE1/*/R/#+/D
Multiplexer with built-in Ethernet port
Note: All
channel modules should be ordered separately (see
below).
OP-XLE1/16/?/*/R/#+/D
Multiplexer with 16 E1 channels
| ? |
Specify
E1 connector
B for balanced (RJ-45)
U for unbalanced (mini coax) |
| * |
Specify
power supply
AC for 110-230 VAC
48 for -48 VDC
24 for 24 VDC |
| R |
Specify
R for second redundant power supply (same
as first) |
| #+ |
Specify
link interface (# for connector type, followed
by + for optical wavelength) |
|
# |
CX for
electrical, coax
connector
ST for ST type connector
SC for SC type connector
FC for FC/PC type connector |
|
+ |
85 for 850
nm, multimode
13 for 1300 nm, single mode
13L for 1300 nm, single mode, laser diode
15L for 1550 nm, single mode, laser diode
13LH for 1300nm, single mode, long haul
laser diode
15LH for 1550 nm, single mode, long haul
laser diode
SF1 for transmit 1300 nm, receive 1550 nm
SF2 for transmit 1550 nm, receive 1300 nm |
| Note: |
For single fiber
connection (WDM) one of the devices has to be
ordered with SF1 interface and the other with
SF2 interface. |
| D |
Specify
D for second redundant link (same type as
first link) |
Channel Modules
OP-XL-M/2E1/BAL for
2 ´ E1, balanced (RJ-45)
OP-XL-M/2E1/UB for
2 ´ E1, unbalanced (BNC)
OP-XL-M/4E1/UB for
4 ´ E1, unbalanced (mini coax)
OP-XL-M/4E1/BAL
for 4 ´ E1, balanced (RJ-45)
OP-XL-M/ETH for
10BaseT Ethernet Station Clock Module
AMC-M/STC/E3 for
station clock module
Link Module
It is possible to add a
redundant link to an existing unit or to replace the
link modules by ordering one of the following AMC-101
modules:
AMC-M/CX/34/CARD
for E3 coax module
AMC-M/MM/#/85/T
for 850 nm multimode module
AMC-M/SM/#/+/T for
single mode modules
