|
|
 |
| |
|
 |
| |
RAD Optimux-4E1
Four E1 Channel Multiplexer
Specifications |
|
| |
- Multiplexes four E1
channels over a single E2 link
- E2 transmission over
coax or fiber optic cable
- Operates with
multimode or single mode fiber
- Laser diode option
- Range up to 75 km (46
miles)
- Voice service channel
- Conforms to ITU G.703,
G.742, G.823, G.956
- Optional second E2
link provides automatic backup
- Optional redundant
power supply
- Management via ASCII
terminal or SNMP management station
- Remote management
using in-band channel
- Compact 1U high size
- Card version for
LRS-24 19" rack with central SNMP management
OP-4E1/*/R/#+/D
Four E1 Channel Multiplexer
OP-4E1C/&/?/#+/D
Four E1 Channel Multiplexer Card
for LRS-24
| & |
Specify LRS-24
rack type
F for ETSI version
B for ANSI version |
| ? |
Specify E1
connector type
TB for terminal block
SC for SCSI
U for unbalanced BNC |
| * |
Specify power
supply
AC for 115 - 230 VAC
48 for -48 VDC
24 for 24 VDC |
| R |
Specify R
for second redundant power supply (optional) |
| D |
Specify D
for second redundant link (same type as first
link) (optional) |
| #+ |
Specify link
interface
(# for connector type, followed
by + for optical wavelength) |
| # |
CXfor
electrical (standalone
version only)
ST for ST type connector
SC for SC type connector
(standalone version only)
FC for FC type connector |
| + |
85 for 850
nm, multimode,
LED
13 for 1300 nm, single mode, LED
13L for 1300 nm, single mode, laser diode
15L for 1550 nm, singlemode, laser diode |
|
|
|
| |
Can't
find what you need ? Call or Email
now ! |
|
|
