- Integrating access
multiplexer for data, voice, fax and LAN
- Maximizes utilization
of main link bandwidth
- Main link data rates
from 9.6 to 768 kbps
- Connects to leased
line, radio, satellite, DDS and ISDN links
- High quality low bit
rate voice/fax from 4.8 to 12.8 kbps
- Analog and digital
voice interface
- The Kilomux family
includes the following models:
- Kilomux-2000 with 12 I/O slots (3U high)
- Kilomux-2004 with 4 I/O slots (1U high)
- Kilomux-2100 with enhanced management, 12 I/O
slots (3U high)
- Kilomux-2104 with enhanced management, 4 I/O slots
(1U high)
- Supports any
combination of I/O modules for:
- Async data
- Sync data
- ADPCM/PCM voice
- MPMLQ and PCELP compressed voice/fax
- Ethernet and Token Ring Internetworking
- Optional redundant
power supply (Kilomux-2000/2100)
- Dual main links for
load sharing, drop&insert or backup
(Kilomux-2000/2100)
- Supports Fractional
E1/T1, as well as switched and leased ISDN main
links
- Management options:
- Front panel LCD
- ASCII terminal
- Alarm monitoring via supervisory port
- RADview SNMP network management system on PC or
Unix (HPOV) platform
- Telnet support
- TFTP support for
common logic software upgrade
Basic units include:
chassis, power supply, main link and common logic. (All
I/O modules, as well as additional system, main link and
power supply modules, are ordered separately.)
I/O Modules for Kilomux
| Type of Module |
Name of Module |
Interface |
Data Rate
Utilization |
| Low
Speed Data |
KLS.1:
2-Channel Low Speed Data Module |
V.24/RS-232 |
0.3 - 38.4 kbps,
sync and async
7.2 - 57.6 kbps,
sync and async
8 - 64 kbps, sync |
KLS.2:
4-Channel
Low Speed Statistical Multiplexing Data Module |
V.24/RS-232 |
0.3 - 19.2 kbps,
async |
| High
Speed Data |
KHS.1:
2-Channel
High Speed Data Module |
V.35, RS-422,
RS-530 or X.21
V.36/V.11 |
32, 48, 56, 64,
128, 192, 256,
384 kbps, sync |
KHS.2:
2-Channel
High Speed Data Module |
V.35, RS-422,
RS-530 or X.21
V.24/RS-232 |
For main link
speeds of:
up to 192 kbps - n x 2.4 kbps
256, 384 kbps - n x 4.8 kbps
512, 768 kbps - n x 9.6 kbps |
KHS.U: ISDN
Interface Data Module
(with single or dual data ports) |
2-wire ISDN
"U" |
Per channels: 16,
32, 64 kbps for B,
16 kbps for D |
| Voice |
KVC.1:
2-Channel ADPCM/PCM Voice Module |
2-wire or 4-wire
E&M,
2-wire FXS or FXO |
24, 32 kbps, ADPCM;
64 kbps, PCM |
KVC.1M:
2-Channel ADPCM/PCM Voice Module with
Echo Cancellation and Ringer Options |
2-wire or 4-wire
E&M,
2-wire FXS, FXSP (Ringer), FXO, FXSW |
16, 24, 32 kbps,
ADPCM;
64 kbps, PCM |
| KVC.3:
2-Channel Low Bit Rate Voice Module |
2-wire or 4-wire
E&M,
2-wire FXS, FXSP, FXO, FXSW |
4.8, 6.4, 7.2 or
9.6 kbps,
MPMLQ Compression |
| Voice/Fax |
KVF.1:
Single Channel Voice/Fax Compression Module |
2-wire or 4-wire
E&M,
2-wire FXS, FXSP or FXO |
Voice: 6.4, 7.2,
8, 9.6 kbps,
Fax: 2.4, 4.8, 7.2 kbps,
PCELP Compression |
| KVF.4:
2-Channel Low Bit Rate Voice/Fax Compression
Module |
2-wire or 4-wire
E&M,
2-wire FXS, FXS3, FXSP, FXO, FXO3, FXSW
4-wire S0-ISDN |
4.8, 6.4, 7.2, 9.6
or 12.8 kbps,
MPMLQ Compression of both
B and D channels |
| KVF.5: 4-Channel
Voice/Fax Compression Module |
E1
T1 |
4.8, 6.4, 9.6,
12.8 kbps,
MPMLQ Compression |
| LAN |
KTRE: Token
Ring Bridge Module |
STP 4/16 Mbps |
9.6 ( 368 kbps
bandwidth allocation on main link |
| KMBE:
Ethernet IP/IPX Router Module |
AUI, Thin Coax,
UTP (10BaseT) |
9.6 ( 368 kbps
bandwidth allocation on main link |
KM-2000/~/^/?
12-slot Modular Multiplexer
KM-2004/~/?
4-slot Modular Multiplexer
KM-2100/~/^/*/?
12-slot Modular Multiplexer (enhanced version)
KM-2104/~/*/?
4-slot Modular Multiplexer (enhanced version)
| ~ |
Specify power
supply:
AC for 115/230 VAC
48 for -48 VDC
24 for -24 VDC (KM-2000/2100 only) |
| ^ |
Specify HP for
KPS.6 or KPS.7
high power supply. (Default is for
low power) |
| * |
Specify management
interface
(in addition to supervisory port):
DP for V.24/RS-232 dial port
EU for Ethernet 10BaseT (UTP)
EB for Ethernet 10Base2 (BNC) |
| ? |
Specify main link
interface:
Available for all models:
V35 for V.35
V24 for V.24/RS-232
V36 for V.36/RS-422/RS-530
X21 for X.21
703 for G.703, co-directional
DDS for standard DDS
S for ISDN "S" interface
U for ISDN "U" interface
Not available
for KM-2004:
T1 for fractional T1, G.703/G.704
E1 for fractional E1, G.703/G.704
&% for fiber optic (see following)
|
| &% |
Specify fiber
optic interface
(& for connector type and % for
optical wavelength):
&: ST
for ST type connector
FC for FC/PC type connector
%: 85 for
850 nm, multimode, LED
13 for 1300 nm, single mode,
LED
13L for 1300 nm, single mode,
laser diode
15L for 1550 nm, single mode,
laser diode
|
SYSTEM MODULES
KM-2000M-KCL.1
Common Logic module for KM-2000
KM-2000M-KCL.2/*
Common Logic module with enhanced management for KM-2100
KM-2000M-KPS.#
Power Supply (for KM-2000/2100 only)
| # |
Specify input
voltage:
3 for -48 VDC, 25W
4 for 115/230 VAC, 50W
5 for -24 VDC, 25W
6 for 115/230 VAC, 56W
7 for -48 VDC, 56W |
KM-2000M-KML.@
Main Link module (see individual module data sheets for
more details)
| @ |
Specify main link
interface:
1 for V.35
2 for V.24/RS-232
3 for V.36/RS-422/RS-530
4 for X.21
5 for G.703, co-directional
6 for standard DDS (US)
7 for fractional T1, G.703/G.704
8 for fractional E1, G.703/G.704
9 for X.50
10/S for ISDN "S" interface
10/U for ISDN "U" interface
F/&% for fiber optic |
|