- Transmits a high speed
data channel over two to six 64 kbps lines
- Supports aggregate
data rate of up to 384 kbps
- Supports BONDING 1, 2
and 3 protocol specifications
- Differential delay of
up to 512 msec
- Setup and control via
supervisory port
- Supports applications
for:
- LAN internetworking
- Video conferencing
- Channel connection
- Also supports G.703
codirectional network interface
- SNMP support using
SLIP protocol
- Software download via
Xmodem protocol
IMX-6L-2/@/#
2-port Inverse
Multiplexer for 64 kbps Leased Lines (includes one data
port)
IMX-6L-4/@/#
4-port Inverse Multiplexer for 64 kbps Leased Lines
(includes one data port)
IMX-6L-6/@/#
6-port Inverse Multiplexer for 64 kbps
Leased Lines (includes one data port)
| @ |
Specify data port
interface
(26-pin female connector):
V35 for V.35 interface
V36 for V.36/RS-449
530 for RS-530
530A for RS-530A
X.21 for X.21 |
| # |
Specify network
port interfaces
(26-pin female connectors):
V24 for V.24/RS-232
V35 for V.35
V36 for V.36/RS-449
530 for RS-530
530A for RS-530A
X21 for X.21
G703 for G.703 codirectional
(RJ-45 connector) |
Cables
All data and network port interfaces (except G.703)
use a 26-pin high density D-type, female connector. The
following cables convert the 26-pin connector to other
physical interfaces. Cable length is 2 meters.
CBL-SCS26/a/b
| a |
Specify physical
interface:
V24 for V.24/RS-232, 25-pin
V35 for V.35, 34-pin
V36 for V.36/RS-449, 37-pin
530 for RS-530, 25-pin
SCS26 for RS-530A, 26-pin
X21 for X.21, 15-pin |
| b |
Specify connector
type:
F for female connector
M for male connector |
RM-7/NEW
Hardware for mounting one or two stand-alone units
in a 19" rack
Publication No:
441-100-09/97
|
