Go to Pulse Home Page Pulse provides industry leading solutions, products and services for Data Communications, WAN and Computer Networking Call Pulse now for all your Datacomm, WAN and computer networking needs !
Click to go back one page
 

 

IMX-64 Inverse Multiplexer

 

RAD
 

 RAD IMX-64 Inverse Multiplexer
Specifications

 
 

 

  • Supports up to six 64 kbps channels
  • One or two data ports support total bandwidth of 384 kbps
  • Integrated ISDN (BRI) or external TAs
  • Supports ISDN backup of high speed leased lines (up to 256 kbps)
  • Provides Bandwidth On Demand
  • Dynamic Bandwidth Allocation
  • Operates over a combination of switched and non-switched lines
  • Support for Euro-ISDN , 5ESS, National ISDN (NI1), DMS-100 and NTT
  • Supports "S" and "U" interfaces
  • Supports S0 leased line
  • Supports BONDING 1, 2 and 3 protocol specifications
  • Differential delay of up to 512 msec
  • Configuration via front panel or control port
  • Resilient operation with failure recovery
  • SNMP support using SLIP protocol
  • Software download via Xmodem protocol

IMX-64/*/#/&/$

* Specify port configuration:
(see table below)
A for 1 data, 1 leased line and 2 ISDN ports
B for 1 data and 3 ISDN ports
C for 2 data, 2 leased lines and 2 ISDN ports
D for 2 data and 3 ISDN ports
# Specify data port interfaces:
V35 one or two V.35
V36 one or two V.36
530 one or two RS-530
530A one or two RS-530A
X21 one or two X.21
V35X21 one V.35 and one X.21
& Specify leased line interfaces:
V24 one or two V.24
V35 one or two V.35
V36 one or two V.36
530 one or two RS-530
530A one or two RS-530A
X21 one or two X.21
V35V24 one V.35 and one V.24
V35X21 one V.35 and one X.21
X21V24 one X.21 and one V.24
$ Specify ISDN port interfaces:
IBE for ISDN-BRI "S"
IBU for ISDN-BRI "U"

Cables
All data port and 64 kbps leased line network interfaces use a 26-pin high density D-type, female connector.
The following cables convert the 26-pin connector to other physical interfaces and should be ordered separately. Cable length is 2 meters.

CBL-SCS26/a/b

a Specify physical interface:
V24 for V.24/RS-232, 25-pin
V35 for V.35, 34-pin
V36 for V.36/RS-449, 37-pin
530 for RS-530, 25-pin
SCS26 for RS-530A, 26-pin
X21 for X.21, 15-pin
b Specify connector type:
F for female connector
M for male connector

RM-7/NEW
Hardware for mounting one or two stand-alone units in a 19" rack

 

 

 

Specifications

PDF File

How to order products from Pulse

Application

Get Adobe Acrobat to read PDF files

 

  Can't find what you need ? Call or Email now !  

 

th11.jpg (990 bytes)

Home | Search | About | Offices | Manufacturers | Products | Services | Ordering
 Data101 | Training | Mailing | Hot ProductsDigital HQ | EmploymentEmail

 
Copyright© 2008 [Pulse, Inc.]. All rights reserved.
Pulse, Inc.
Tel: (toll free): 888-785-7393   Int'l: 1-951-694-1173  Fax: 1-951-694-1173 

Sales: sales