- Supports ISDN backup
of leased lines and Dynamic Bandwidth Allocation
- Provides Bandwidth On
Demand (smart terminal adapter)
- Operates over a
combination of two switched (B channels) and one
leased line
- Integrated terminal
adapter supports Euro-ISDN, 5ESS, National ISDN
(NI1), DMS-100 and NTT
- Supports "S"
and "U" interfaces
- Supports S0 leased
line
- Supports BONDING 1, 2
and 3 protocol specifications
- Differential delay of
up to 512 msec
- Configuration via
front panel or control port
- Resilient operation
with failure recovery
- SNMP support using
SLIP protocol
- Software download via
Xmodem protocol
IMX-2/#/&/$
ISDN Inverse
Multiplexer
| # |
Specify data port
interface:
V35 for V.35
V36 for V.36/RS-449
530 for RS-530
530A for RS-530A
X21 for X.21 |
| & |
Specify leased
line interface:
V35 for V.35
V36 for V.36/RS-449
530 for RS-530
530A for RS-530A
X21 for X.21 |
| $ |
Specify ISDN port
interface:
IBE for ISDN-BRI "S"
IBU for ISDN-BRI "U" |
Cables
All data port and 64 kbps leased line network
interfaces use a 26-pin high density D-type, female
connector.
The following cables convert the 26-pin connector to
other physical interfaces and should be ordered
separately. Cable length is 2 meters.
CBL-SCS26/a/b
| a |
Specify physical
interface:
V35 for V.35, 34-pin
V36 for V.36/RS-449, 37-pin
530 for RS-530, 25-pin
SCS26 for RS-530A, 26-pin
X21 for X.21, 15-pin |
| b |
Specify connector
type:
F for female connector
M for male connector |
RM-17
Hardware for mounting one or two stand-alone units in a
19" rack
|
