- Extends the range of
digital equipment over existing copper cables,
eliminating the need for repeaters or optical cables
- Range of up to 9.2 km
(5.7 miles) with H-RPT repeater or up to 4.8 km (3
miles) without repeater
- Data rates n x 56 or n
x 64 kbps, up to 2048 kbps
- Complies with the ETSI
HDSL standards
- Supports digital
interfaces of V.35, V.36, X.21, RS-530 or built-in
Ethernet bridge
- Card version for
LRS-12 modem rack with SNMP management
- Built-in SNMP agent
for standalone and card versions Embedded channel
for control and diagnostics of both central and
remote units
- Supports priority
bumping
- Setup, control and
monitoring via front-panel LCD or supervisory port
- HTU-2C provides remote
power feeding option for HTU-E1L/P and HTU-2/P
- HTU-2 and HTU-2C work
opposite HTU-E1, HTU-E1L, HCD-E1 and H-RPT
- High voltage line
protection in compliance with ITU K.21
HTU-2/N/*/&/+
HDSL Termination Unit, standalone version
HTU-2CF/N/&/+
HDSL Termination Unit, card for ETSI version of LRS-12
rack
HTU-2CB/N/&/+
HDSL Termination Unit, card for ANSI version of LRS-12
rack
| * |
Specify
power supply:
AC for 100 , 240 VAC
48 for -48 VDC
|
| & |
Specify
DTE interface:
V35 for V.35 interface
V36 for V.36 interface
X21 for X.21 interface
530 for RS-530 interface
E1 for G.703 (2048K) interface
UTP for Ethernet with RJ-45 connector
BNC for Ethernet with BNC connector
|
| + |
Specify
P for remote power feeding support
|
RM-17
Special hardware for mounting one or two HTU-2
standalone units in a 19" rack
|
