|
|
 |
| |

|
 |
| |
RAD
DV-MUX3
Adaptive Multiplexer for
Voice, Fax and Data Specifications |
|
| |
- Integrates voice/fax
and data for transmission via a dial-up modem or a
digital link
- Adaptive bandwidth
allocation optimizes bandwidth utilization
- One or two compressed
voice/fax channels plus one synchronous data channel
- TDM, bit-interleaved
for low delay
- High quality MPMLQ
voice compression at 4.8, 6.4, 7.2, 9.6 or 12.8 kbps
- Automatic voice/fax
detection
- In-band fax support
for Group III fax
- Supports applications
requiring double compression
- Voice interfaces:
- 2-wire FXS
- 2-wire FXO
- 2-wire/4-wire
E&M
- Integral support of DC
current feed and ring generation for FXS interface
- Link data rates from
9.6 to 256 kbps
- Guaranteed bandwidth
allocation for SNA traffic
- Link interfaces:
- V.24/RS-232
- V.35
- V.36/RS-449
- RS-530
- X.21
- Configuration
downloading to remote unit
- Remote loopback, BER
test, tone injection
- Dial-up on demand
function for PSTN applications
- Automatic adjustment
to fall-back data rate
DV-MUX3/V/*/#/+
Multiplexer with single voice channel
DV-MUX3/2V/*/#/+
Multiplexer with two voice channels
| * |
Specify
power supply:
100 for 100 VAC supply
115 for 115 VAC supply
230 for 230 VAC supply
48 for 48 VDC supply
|
| # |
Specify
interface for voice channel:
S for 2-wire FXS
O for 2-wire FXO
X for one channel FXS and the other FXO
(available only with 2V option)
E for E&M interface
|
| + |
Specify
interface for both link and data channel:
V24 for V.24/RS-232
V36 for V.36/RS-449
530 for RS-530
X21 for X.21
3524 for V.35 link and V.24 data channel
2124 for X.21 link and V.24 data channel
|
|
|





|
| |
Can't
find what you need ? Call or Email
now ! |
|
|