Go to Pulse Home Page Pulse provides industry leading solutions, products and services for Data Communications, WAN and Computer Networking Call Pulse now for all your Datacomm, WAN and computer networking needs !
Click to go back one page
 

 

ASMi-31 Async/Sync Short Range Modem with Management

 

RAD
 

 RAD ASMi-31 Async/Sync Short Range Modem
with Management

 
 

 

  • The ASMi-31, Remote Control Sync/Async Short Range Modem, operates full duplex over twisted pair, 2-wire unconditioned lines. It has a transmission range of up to 8 km (5 miles) over 24 AWG wire (see Table 1) and operates at user selectable rates from 1.2 kbps to 128 kbps.
  • The modem uses 2B1Q line code and adaptive equalizers, which provide immunity to background noise, eliminate normal line distortion and enable efficient transmission over 2-wire twisted pair cables.
  • Transmit timing is either provided internally, or recovered from the received signal (user-selectable). Alternatively, the transmit timing can be detected automatically and derived externally from the digital interface, enabling tail-end applications. The carrier may be continuous or controlled by RTS, for passing control signals end-to-end (user-selectable).
  • ASMi-31 supports a wide range of digital interfaces: V.24/RS-232, V.35, X.21, RS-530, V.36/RS-449 and G.703 Codirectional (64 kbps). In addition, an Ethernet/802.3 bridging option enables direct connections of an Ethernet LAN to both sides of the ASMi-31 link.
  • The ASMi-31 system configuration is stored in non-volatile memory, minimizing system down-time when power is down or when a faulty remote unit is replaced.
  • Setup, status, alarms and diagnostics can be monitored and activated from the ASMi-31 front panel, or via a standalone portable control unit (PCU). Alternatively, the ASMi-31 can be managed from an ASCII terminal or an SNMP Unix/PC station connected to LRS-12/24.
  • Line interface circuitry protects against lightning and power surges.
  • ASMi-31 is available as a standalone unit in both ASMi-31/M "Master" and ASMi-31/S "Slave" versions. The master version has a front panel LCD and control switches. The slave unit has a blank panel, which prevents unauthorized changes to link parameters. ASMi-31 is also available as a card for central solutions.

 


 

 

Specifications

PDF File

How to order products from Pulse

Application

Get Adobe Acrobat to read PDF files

 

  Can't find what you need ? Call or Email now !  

 

th11.jpg (990 bytes)

Home | Search | About | Offices | Manufacturers | Products | Services | Ordering
 Data101 | Training | Mailing | Hot ProductsDigital HQ | EmploymentEmail

 
Copyright© 2008 [Pulse, Inc.]. All rights reserved.
Pulse, Inc.
Tel: (toll free): 888-785-7393   Int'l: 1-951-694-1173  Fax: 1-951-694-1173 

Sales: sales