Voice Compression
-------------
NetPerformer

Specifications

SDM-9500 (Rackmount)

Modular chassis: 8 slots for voice/data modules, one slot for 100 Mbps Firewire bus expansion card to additional chassis (up to 2 in a single daisy-chain utilizing SDM-9585)

•Power: auto-sensing 100-240 VAC, 50/60 Hz, -48 VDC
•Optional redundant VAC power supply

SDM-9585 for SDM-9500 chassis

•3 universal serial ports (user or link), RS-232C, X.21/V.11, RS-530, RS-449/RS-442, V.35
•One 10BaseT Ethernet
•4 expansion slots for interface modules
•Up to 4 DSP SIMMs per module
•Performance Level: 10,000 cells per second per module
•Maximum of 4 SDM-9585 modules per SDM-9500 chassis

SDM-9380 (Standalone)

•3 universal serial ports (user or link), RS-232C, X.21/V.11, RS-530, RS-449/RS-442, V.35

•One 10BaseT Ethernet
•4 expansion slots for interface modules
• Up to 4 DSP SIMMs per unit
•Power: auto-sensing 100-240 VAC, 50/60 Hz
•Performance Level: 10,000 cells per second

SDM-9360 (Standalone)

•2 universal serial ports (user or link), RS-232C, X.21/V.11, RS-530, RS-449/RS-442, V.35
•One 10/100BaseT Ethernet
•4 expansion slots for interface modules
• Up to 2 DSP SIMMs per unit
•Power: auto-sensing 100-240 VAC, 50/60 Hz
•Performance Level: 4,000 cells per second

SDM-9500 (SDM-9585), SDM-9380, and SDM-9360

•IM-T1: T1 interface module for PBX or WAN connection with integrated CSU (RJ48 connector)
•IM-E1-75: E1 interface module for PBX or WAN connection (75 ohms, BNC connectors)
•IM-E1-120: E1 interface module for PBX or WAN connection (120 ohms, RJ48 connector)
•IM-EM: 4-port E&M module (2- or 4-wire: types I, II, or V, RJ48 connectors)
•IM-FXS: 2-port FXS module (loop start, RJ11 connector)
•IM-FXO: 2-port FXO module (loop start, RJ11 connector)
•IM-BRI: 2-port BRI S/T for PBX or WAN connection (RJ48 connectors)
•IM-DSI: 2-port universal serial WAN interface (HD26F connectors)
•SIMM-1: 1-DSP voice processing module, supporting 3-4 voice channels, depending on algorithm
•SIMM-3: 3-DSP voice processing module, supporting 9-12 voice channels, depending on algorithm
•SIMM-6: 6-DSP voice processing module, supporting 18-24 voice channels, depending on algorithm

Up to 24 DSPs per SDM-9585 module or SDM-9380 unit

Up to 12 DSPs per SDM-9360 unit

Serial connectors: HD26 female

•Interface types: DTE or DCE, RS-232, V.35, X.21, RS-449, RS-530
•Internal/external clocking

Network Topology: Public and private Frame Relay and ATM, mesh, hierarchical, star, point-to-point, Satellite point-to-point/multipoint (SkyPerformer option)

QoS: 8 classes of service, 16 priority weights, association to 802.1p and TOS bits (version 9.2)

Circuits: leased, switched, Frame Relay and ATM Link port protocols Leased lines and dial back-up:

•PowerCell Data, Synchronous full duplex, HDLC T1/E1 channelized
•Frame Relay and HDLC, full or fractional services, up to 64 logical ports. Drop and insert for voice and data

IP WAN:

•PowerCell Data over IP, using Ethernet, PPP, Frame Relay or ATM interfaces

Frame Relay:

•User- UNI, network - UNI, RFC1490, PowerCell

• Local management interface: LMI, ANSI T1.617/annex D, ITU-T Q.933/annex A, CLLM or disabled

• PVCs: 300 per node, automatic DLCI discovery. ATM (optional license required):

• T1/E1 full or fractional, PowerCell Data over AAL5 UBR

using up to 31 VCs, RFC1483 Multi-protocol Encapsulation over AAL5, RFC2364 PPP over AAL5 , FRF.8 Service Interworking

ISDN E1 PRI and BRI:

•Switched or leased line mode, Frame Relay, Power Cell Data. PPP, HDLC

Link port maximum speed without compression: 2.048 Mbps
Link port maximum speed with data compression: 2.048 Mbps

(SDM-9360 only 384Kbps)

Automatic node discovery and rerouting with least cost metric routing

Automatic load balancing, bandwidth on demand (over leased line), dial back-up, time-of-day connect

Dialing protocols: V.25bis, X.21, AT and control leads, D channel on ISDN PRI and BRI

SDM-9500

Maximum telephony channels: up to 8 FXS or FXO, 16 E&M or ISDN BRI, or 96 digital channels per SDM-9585 module

Maximum of 240 voice channels per SDM-9500 chassis

SDM-9380

Maximum telephony channels: up to 8 FXS or FXO, 16 E&M or BRI, or 96 digital channels per chassis

SDM-9360

Maximum telephony channels: up to 8 FXS or FXO, 16 E&M or BRI, or 30 digital channels per chassis

SDM-9500 (SDM-9585), SDM-9380, and SDM-9360

Voice compression algorithms (number of channels per DSP):

•ACELP-CN 8K/6K, G.729/G.729a (8K), G.711 (PCM 64K), Fax Relay: 4 channels

•G.729, G.723 (Low 5.3K/High 6.3K), Modem Relay (only with PowerCell): 3 channels

•G.726 (ADPCM 16K/24K/32K/40K): 5 channels Digital telephony channels:

• T1 line coding: B8ZS/B7ZS/AMI, D4/ESF framing

• T1 signaling: robbed bit signaling, CCS transparent, ISDN Japan, ISDN National and QSIG (version 9.2)

• E1 line coding: HDB3

• E1 signaling: CAS, R2, EuroISDN / ETSI, QSIG

•Digital CAS Signaling types: Immediate, Wink, FXO, FXS, FXO ground, FXS ground, custom

•ISDN BRI Signaling: EuroISDN / ETSI and Japan, ISDN National and QSIG (version 9.2)

•Mu-law or A-law coding

ATM telephony channels:

• AAL1 Circuit Emulation Services (maximum 20 channels), compressed voice over AAL5 using PowerCell

Analog line impedance: 600, 900 ohms and complex
Group III FAX: 4.8, 7.2, 9.6,12.0, 14.4 Kbps
Modem Relay: V.32bis up to 14.Kbps

Network signaling:

•NetPerformer: any-to-any switching, proprietary using PowerCell
•NetPerformer EG version: any-to-any switching, VoIP SIP (Session Initiated Protocol), call control by Class 5 Call Manager, including end-to-end QSIG support

SDM-9500: One 10BaseT per SDM-9585 module, four per SDM-9500 chassis
SDM-9380: One 10BaseT
SDM-9360: One 10/100BaseT

Ethernet interfaces: Ethernet II and IEEE 802.2, 802.3, SNAP
Standards: IP RIP V1/V2 or Static, OSPF, NAT, IP Multicast

IGMP V1/V2 PIM-DM, BootP/DHCP relay, DHCP client (version 9.2), IPX RIP and SAP, LLC2, 802.1p/q prioritization and VLAN (version 9.2), 802.1D Spanning Tree Protocol (STP), MAC Layer Filter criteria: based on protocol, address (source, destination or SAP), TOS bit/diffServ or custom filtering

Maximum speed: 2.048 Mbps

Protocols:

•SNA: SDLC, LLC2 or Frame Relay RFC-1490 (BAN, BNN), maximum of 64 PUs per module/unit, (types 1, 2.0, 2.1, 4/5),
Local SDLC and LLC2 spoofing, SDLC/LLC2 conversion

• Legacy Sync: PPP, BDLC, HDLC, SDLC, X.25, X.25 over Frame Relay (annex F/G), COP, BSC, VIP, IBM/RJE, Uniscope,
Poll/Select, Siemens Nixdorf, JCA, Zengin

•Frame Relay: RFC-1490, UNI-DTE, UNI-DCE
•Asynchronous: ENQ/ACK, XON/XOFF, transparent, CTS/DTR

SDM-9500

Height: 12.5" (31.8 cm)
Width: 17.5" (44.5 cm)
Depth: 12.3" (31.1 cm)
Typical weight 23 lbs. (10.4 kg)
Typical shipping weight: 26 lbs. (11.8 kg)

SDM-9380 and SDM-9360

Height: 3.5" (9.2 cm)
Width: 17.5" (44.5 cm)
Depth: 12.3" (31.1 cm)
Weight: 13 lbs. (5.9 kg)
Typical shipping weight: 17 lbs. (7.7 kg)

Operating Temperature: 0° to 45° Celsius
Relative Humidity: 10% to 90%, non - condensing

Clarent NetPerformers comply with or have obtained Regulatory Agency approval at least against the following standards:

EMC – Emission FCC CFR 47 Part 15; EN 55022 (1998); AS/NZS 3548 (1995)
EMC – Immunity EN 55024 (1998)
Safety IEC 950/60950 (1991) + Amendments 1 to 4
EN 60950 (1992) + Amendments 1 to 4
UL 1950 3rd Edition; CSA C22.2 N°950
AS/NZS 3260 (1993); ACA TS001 (1997)
Telecom – Analog FCC Part 68; IC CS-03 Part 1
Telecom – Digital FCC Part 68; IC CS-03 Part 2 and Part 6
TBR 001, TBR 002, TBR 003, TBR 004, TBR 012, TBR 013, NTR4

SNMP management via ACTview 3000 Network Management

System for HP OpenView network node manager for Windows or Sun Solaris

Menu driven async console port (VT-100) via DB9 male connector, auto-sensing DTE/DCE

Remote Telnet access to command port

FTP upload and download of software and configuration Traps, traces and extended statistics

Username/password security control, administrative filtering