| To support critical
applications, the TSU 600e also has the capability to
support dual redundant power supplies internally. The
power supply module is capable of supporting a fully
loaded TSU 600e and is hot-swappable.
Support for future
growth, through the units six expansion slots, is a key
feature of the TSU 600(e). The ability to combine many
types of plug-in and plug-on modules provides extensive
combinations of voice and data interfaces. Several data
modules are available for single and dual-port access to
Frame Relay, DDS or Basic Rate ISDN services provided
over T1 facilities. Voice modules are also easily
integrated, allowing access to analog voice circuits or
PBX connections. As a fully functional T1 Multiplexer,
the TSU 600(e) supports all mixed-mode networking
applications providing termination for circuits
containing voice, data and video applications.
Configuration and
management of the TSU 600(e) is available through a
variety of methods. The TSU 600(e) supports SNMP with
Gets, Sets and Traps functionality through a built-in
Agent. ADTRAN Enterprise MIBs support management for the
TSU 600(e) and all installed expansion modules. For
access to SNMP features, the TSU 600e has both a 10BaseT
Ethernet and a SLIP (EIA-232) connection, while the TSU
600 has a SLIP interface only. In addition to SNMP, the
unit utilizes the management capabilities found in
optional software products from ADTRAN. For Windows 95
or NT, the popular T-Watch PRO software package
facilitates easy configuration and monitoring of the TSU
600(e). For more complex network management systems,
ADTRANs ADVISION operates on an SNMP Enterprise
Management system such as HP OpenView and provides full
GUI configuration and control via SNMP.
Features
- T1/FT1 Multiplexer
- Cost-effective Channel
Bank Replacement
- TR-08 Mode 1,
unconcentrated
- Embedded SNMP
management
- Six option module
slots support up to 4 DTE ports each
- Customer interface
modules available for analog voice, digital voice,
DDS, Frame Relay, dial backup, high-speed data and
ISDN
- Front panel, backlit
LCD for configuration and monitoring
- Extensive network
testing and troubleshooting
- T-Watch PRO and Telnet
support for local and remote units
- 600e supports
redundant AC power
- 5 year warranty
Product Specifications
TSU 600/600E
INTERFACE
Network
Interface
- Line Rate:
1.544 Mbps +/- 75bps
Physical
Interface
Framing
- D4(SF) / ESF
- AT&T 54016
or ANSI T1.403
Line
Code
Input
Signal
DS0
Assignment
T1
Transmit Timing
- Network,
Secondary NI, Normal (CSU), Internal
MANAGEMENT
OPTIONS
Front
Panel LCD & Keypad
- LCD: 2x16
backlit display
- Keypad: Full
numeric, 16-key
- LEDs: System,
CSU, Test, Error and Alarm
Control
In / Control Out Ports
- Interface:
EIA232, PC Serial Port or Modem or SLIP
connection to router
- Physical
Connector: RJ45, modular 8-pin
SNMP/Telnet
- SLIP
connection to router
- MIB II, RFC
1213 & 1407 compliant
- ADTRAN
Enterprise MIB for Extended Monitoring,
600/600e Control/Configuration and expansion
module support
10BaseT
Interface (600e only)
- Interface:
IEEE 802.3 compliant, 10 Mbps
- Physical
Connector: RJ-45, modular 8-pin
- Service: SNMP,
Telnet, ICMP, ARP, Ping and T-Watch PRO
TESTING OPTIONS
Local
- Payload, Line
and DTE Loopback (option module)
Remote
- Payload, Line
and DTE Loopback (option module)
- Fractional T1
Loopback: Per ANSI T1.403-1995, Annex B
- CSU Loopback
(From telco)
Network
Interface Test Jacks
- Bantam Jacks:
TX, RX and RXMON
Test
Pattern Generator
- QRSS and 511
(selectable DS0s with detector)
- All 0s and All
1s (Transmit Only)
|
|
TR-08 SUPPORT
- Conforms with
TR-TSY-000008
- TR-08 Mode I,
Unconcentrated
- SLC96 framing
with alarmreporting/monitoring
- ORB-13 or
ORB-16 alarm messaging formats
- Single Party
Ringing (SPR) and Universal Voice Grade (UVG)
analog ports supported with FXS modules.
CLASS services also supported with these
modules.
PERFORMANCE
MONITORING
- Error Counts:
ES, SES UAS, % AS, % EFSEC, Alarms and Error
Rates
- Reports: NI
information stored for last 24 hrs
(15-minute increments)
- PRMS: ANSI
performance report messages
AGENCY APPROVALS
- UL 1950 and
CUL
- FCC Part 15
(Class A) and Part 68
ENVIRONMENT
- Operating: 0°
to 45° C (32 to 122° F)
- Storage: 20°
to 70° C (4 to 158° F)
- Relative
Humidity: Up to 95%, non-condensing
PHYSICAL
- Dimensions:
5.5" H x 12.5" D x 17.5" W
- Weight: 13 lbs
POWER
- AC Power TSU
600: 90-130VAC, 60Hz, 40W Max
- AC Power TSU
600e (single supply): 90-120VAC,50/ 60Hz,
40W Max
- DC Power 600
& 600e DC: 21-26VDC or 40-56VDC, 40W Max
PRODUCT INCLUDES
- Two 8-pin to
8-pin modular cables
- One modular to
female DB-25 adapter
- 19"
rackmount ears
- User Manual
Note: All
specifications are the same for the tsu 600
& tsu 600e unless otherwise noted.
T-Watch Pro and Advision trademarks of
Adtran,inc.
Windows 95 and NT are registered trademarks of
Microsoft corporation
HP openview is a registered trademark of
hewleett packard company
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. |
Ordering Information
- TSU 600e -
1202076L1
- TSU 600e with
redundant power - 4202076L9
- TSU 600e DC -
1202076L1#DC
- TSU 600 -
1202076L2
- TSU 600 DC -
1202076L2#DC
|
