| TRACER transports two T1
digital signals in any framing or line code format and
provides two DS1/DSX-1 interfaces. A separate
maintenance channel is embedded in the TRACER data
stream, providing remote configuration and monitoring
functions. The maintenance channel is provided without
impacting the T1 capacity.
By using the latest
technology and incorporating ADTRAN's ISO 9001
manufacturing processes, ADTRAN has designed TRACER to
provide the highest levels of reliability and
durability. As a result, TRACER is backed by an
industry-leading standard 5-year warranty and ADTRAN's
outstanding 24-hour technical support.
Features
- Digital microwave
radio
- Dual T1
- No license required:
FCC rules part 15.247
- Direct sequence spread
spectrum
- Frequency 2.4 to
2.4835 GHz
- Frequency agile
- Remote loopback
- Remote control of
far-end
- Point-to-point, up to
30 miles
- 2U, 19" rack
space
- Industry leading
5-year warranty
Product Specifications
TRANSMITTER
- Output Power:
+20 dBm Max
- Frequency
Band: 2.4 to 2.4835 GHz
- Channel
Bandwidth: 40 MHz
- Intermediate
Frequency: 140 MHz
RECEIVER
- Receive Level
Threshold: -91 dBm (10-6 BER)
- Receive Level
Max: -30 dBm
- Receive Level
Nominal: -60 dBm
- Frequency
Range: 2.4 to 2.4835 GHz
- Channel
Bandwidth: 40 MHz
- Intermediate
Frequency: 70 MHz
FREQUENCY PLAN
- A-TX 2.422 GHz
RX 2.462 GHz
- B-TX 2.462 GHz
RX 2.422 GHz
SPREAD SPECTRUM
DATA PUMP
- Modulation:
QPSK
- Spreading
Method: Direct sequence
- Codes: 10
- Code Length:
120
- Processing
Gain: >12 dB
- Spreading
Rate: 12 times
RADIO FREQUENCY
CONVERTER
- Preselector
Filter: Cavity tuned
- Antenna Port:
N-type, female
- Impedance: 50
ohm
DIGITAL
INTERFACE
- Capacity: 2 x
T1
- Data Rate: 2 x
1.544 Mbps
- Digital
Interface: DS1, DSX-1
- Connection:
RJ-48C, Bantam
- Monitor:
Bantam
- Line Code:
AMI, B8ZS
- Framing: SF,
ESF
- Alarms: YEL/AIS,
Red, BPV
- Loopbacks:
Local & remote
|
|
USER INTERFACE
- Front Panel:
Status LEDs, configuration switches
- Diagnostics:
T1 loopback, remote test with BERT,
self-test
- Test Points:
RSSI, system voltages, I & Q
- Alarm
Contacts: Major, minor (normally open or
closed)
TERMINAL
INTERFACE
- Function:
Menu-driven user interface, monitor and
control of local and remote end, password
protected, event history
- Data Rate:
9600 Bps
- Emulation: VT
100
- Connection:
DB-25 (RS-232)
MECHANICAL &
ENVIRONMENTAL
Baseband
Processor
- Operating
Temperature: -25° to 65°C
- Width:
16.75", (for 19" EIA rackmounting)
- Height: 1U
(1.75")
- Depth:
11.5"
- Humidity: 95%,
non-condensing
- Weight: 6 lbs
Rackmount
RFC
- Operating
Temperature: -40° to 65°C
- Width:
16.75", (for 19" EIA rackmounting)
- Height: IU
(1.75")
- Depth:
11.5"
- Humidity: 95%,
non-condensing
- Weight: 9 lbs
Power
- Input Voltage:
21-56 VDC
- Power
Consumption: 30 watts, (amperage=30
watts/voltage)
- DC Connector:
3-pin screw clamp
- AC Adapter
Connector: 3-pin DIN
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. |
Ordering Information
- 2xT1 Rackmounted
system, preconfigured frequency plan A-
4280TRACERT1L2-A
- 2xT1 Rackmounted
system, preconfigured frequency plan B-
4280TRACERT1L2-B
- AC Adapter
-1360DSK24VL1
*Systems are shipped with pre-configured frequency
plans, but may be switched without additional
equipment to accommodate either plan.
|
