| The MX2800 houses two
hot-swappable controller cards that are capable of
combining independent T1s, E1s, or T1s and E1s, on the
same DS3. The two controller cards also provide built-in
1:1 redundancy for the DS1 and DS3 signals as well as
redundant DS3 connections. A fully connectorized
backplane means no wire wrapping and quick easy
installation.
As with all ADTRAN
products, the MX2800 offers comprehensive management
options. It features a VT100 terminal interface for
local configuration. To support SNMP and Telnet
management, the MX2800 has an integrated 10BaseT
Ethernet port. Also integrated into the unit is a V.34
modem operable in VT100 mode or SLIP/PPP mode for SNMP
and Telnet access. The modem is capable of performing a
dial-out "cry for help" for units that are
located in unmanned facilities.
Carriers looking to
maximize their copper investment and consolidate their
services in the most efficient manner will find the
MX2800 will pay off quickly. For example, a bandwidth
reseller who is co-located at an unmanned site and
backhauling local and long distance voice service can
use the MX2800 to gain T1 access off HiCap SONET rings.
The MX2800 is also ideal for Competitive Local Exchange
Carriers (CLECs) who are also looking for an efficient
means for backhauling local and long distance voice to
or from the IXC or LEC. As Internet use continues its
rapid expansion, Internet Service Providers are also
well served with the MX2800's bandwidth consolidation.
Features
- Affordable DS3
bandwidth consolidation
- Built-in 1:1
redundancy
- Hot swappable
controller cards
- SNMP and Telnet
management
- Quick, easy
installation
- Connectorized
backplane
- Capable of backhauling
multiple service types (T1/E1)
- Smallest M13 form
factor available
- Integrated V.34 modem
- Dial-out "cry for
help"
- AC or DC power
- M13 and C-Bit
signaling support
- NEBS Level 3 compliant
- Standard 10-year
warranty
Product Specifications
DS3 NETWORK
INTERFACE
- Channelized
DS3
- Line Build
Out: Short (0 to 50 feet), and Normal (50 to
450 feet)
- Framing
Format: M13 and C-bit parity
- Line Rate:
44.736 Mbps
- Line
Interface: Dual 75 ohm BNC coax female
connectors
DSX-1
INTERFACE(S)
- Line Build
Out: 0 - 655 feet
- Line Rate:
1.544 Mbps
- Line Code: AMI
or B8ZS
- Line Framing:
SF (D4) or ESF
- Line
Interface(s): (2) 64 pin Amp connectors
CLOCKING
- Network -
receive from DS3 network
- Local -
internally generated
- External -
external BNC input
DIAGNOSTICS
DS3
Network
- ANSI T1.107
compatible loopbacks
- Line,
loopbacks
DSX-1
Ports
- Local and
network loopbacks
Performance
Monitoring
Local
Network Port Statistics
Current 15 minute,
24 hour (96 15 minute intervals), total for 24
hours and cumulative
- P-bit errored
seconds
- P-bit severely
errored seconds
- Severely
errored framing seconds
- Unavailable
seconds
- Line coding
violations
- P-bit coding
violations
- Line errored
seconds
- C-bit coding
violations
- C-bit errored
seconds
- C-bit severely
errored seconds
- F-bit and
M-bit errors
DSX
Ports
|
|
MANAGEMENT
VT 100
Terminal Interface
- RJ-48, EIA-232
compatible, female DB25 adapter provided
Integrated
Modem Interface
- Dial up access
for VT 100, SNMP or Telnet
- Dial out
"Cry for help"
SNMP/Telnet
- Integrated
10BaseT Ethernet
- MIB II, RFC
1213 & 1407 compliant
- ADTRAN
Enterprise MIB for extended monitoring and
control/configuration
ALARMS
- External alarm
contacts for critical and non-critical
alarms
- Normally open
and normally closed pinout
- Front panel
alarm cutoff switch
AGENCY APPROVALS
- FCC Part 15,
Class A, Part 68
- Industry
Canada CS03
- UL and CUL
- NEBs Level 3
compliant
ENVIRONMENT
- Operating
Temperature: 0* to 50*C, (32* to 122*F)
- Storage
Temperature: -20* to 70*C, (-4* to 158*F)
- Relative
Humidity: Up to 95%, non-condensing
PHYSICAL
- Dimensions:
1.7" H, 7.86" D, 17" W
- Weight: 5.5
lbs
- Power: 120 VAC
or 48 VDC, 30W
Product Includes
- (2) 6 foot
Coax cables, (1) 8-pin to 8-pin modular
cable, (1) modular to female DB-25 adapter
and user manual, mounting ears for 19"
and 23" racks
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. |
Ordering Information
- MX2800 - AC
Redundant w/ modem- 4200290L2
- MX2800 - DC
Redundant w/ modem- 4200290L4
- MX2800 - AC w/
modem- 4200290L1
- MX2800 - DC w/
modem- 4200290L3
- RJ DSX-1 Patch
Panel- 1200291L1
- MX2800 - AC
Redundant- 4200290L6
- MX2800 - DC
Redundant- 4200290L8
- MX2800 - AC-
4200290L5
- MX2800 - DC-
4200290L7
|
