| The ADTRAN FSU is a
stand-alone Frame Relay access device (FRAD) that
provides a cost-effective means of transporting
multi-protocol data over frame relay networks. The
ADTRAN FSU provides an easy-to-use interface for
customers migrating existing services or developing new
applications for operation over Frame Relay networks.
The FSU provides two
independent DTE interfaces for connecting non-Frame
Relay devices to the Frame Relay network. The DTE ports
support synchronous data rates from 2.4 to 512 kbps and
asynchronous from 2.4 to 38.4 kbps. Both EIA-232 and
V.35 physical interfaces are available for connection to
the customers' DTE equipment. The FSU's concentrator
feature allows the connection of two Frame Relay devices
to a single Frame Relay network interface.
The FSU may be purchased
with an integral 56/64 DDS DSU/CSU or an external DSU/CSU
may be connected to the DCE interface. Network speeds up
to 512 kbps and both EIA-232 and V.35 physical
interfaces are supported through the DCE port.
The FSU supports SNA,
SDLC, Bisync, SLIP, IP, PPP (both synchronous and
asynchronous), Frame Relay, BOP, and asynchronous
protocols. The DTE ports can be configured
independently, providing support for multi-protocol
applications.
Embedded SNMP and Telnet
are available in-band. SNMP is provided with support for
RFC 1315 and MIB II. Through the Management Information
Base (MIB)-II standard and an ADTRAN-supplied enterprise
MIB, the FSU can be configured, monitored, and diagnosed
using standard SNMP network management programs such as
HP OpenView, NetView, and SunNet Manager.
Complete control,
configuration, and diagnosis are available through a
16-position keypad and a two-line by 16-character LCD
display. A VT100 terminal configuration and control mode
is also available through the control port. Flash
download capability is implemented for installation of
new features and enhancements.
Features
- Network connection via
optional 56/64 DDS DSU/CSU or external DDS or FT1
DSU/CSU
- SNMP/Telnet Management
- RFC 1490 encapsulation
for IP and LLC2
- SDLC local port
spoofing
- IP support using SLIP,
PPP-async, PPP-sync, with routing
- Frame Relay
concentrator mode which allows two Frame Relay
devices to utilize a single network interface
- Prioritization scheme
which ensures proper SNA response times in mixed
protocol environment
- Frame Relay management
using ANSI, ITU, or LMI formats
- Easy to use VT 100
interface for configuration
- Standard 5-year
warranty
Product Specifications
OPERATING MODES
- Frame Relay
utilizing DDS or FT1 circuits
DTE & DCE
RATES PROVIDED
- DTE:
Synchronous rates: 2.4 to 512 kbps
asynchronous rates: 2.4 to 38.4 kbps
- DCE:
Synchronous rates 2.4 to 512 kbps
DTE & DCE
INTERFACES
- EIA-232
electrical and physical interfaces
- V.35
electrical, physical with adapter cable
CONTROL PORT
INTERFACE
- Electrical:
EIA-232
- Physical:
RJ-48S (female DB-25 adapter provided)
- Data Rates:
Async 2.4 to 38.4 kbps
SNMP
- Internal SNMP
agent
- MIB II RFC
1213
- Frame Relay
DTE MIB RFC 1315
- ADTRAN
enterprise MIB
- Telnet Access
PROTOCOL SUPPORT
Concentrator
IBM
Support
- SNA/SDLC with
local spoofing
- SDLC/HDLC
transparent
- SDLC-LLC2
translation
- Supports up to
20 SDLC PUs on each DTE port
LAN
Protocol
- SLIP
- IP-PPP
asynchronous or synchronous
Transparent
- Asynchronous
transparent
- BOP
transparent
Protocol
Encapsulation
- IP (SLIP and
PPP) and LLC2 protocols are encapsulated
using RFC 1490 formats
- All other
protocols use proprietary formats and
require ADTRAN devices at each UNI
|
|
DATA FLOW
CONTROL
- Synchronous:
Clock slowing
- Asynchronous:
CTS or XON/XOFF
DIAGNOSTICS
- CSU and DSU
loopbacks
- IP Ping Mode
OPTIONAL 56/64
DDS DSU/CSU SPECIFICATIONS
- Network Data
Rates: Dedicated 56 and 64 kbps
- Loop
transmission parameters as defined in
AT&T PUB 62310: Dedicated DDS
- Line
Interface: RJ-48S, 4-wire, full duplex
- Receiver
Sensitivity: -45 dB at all rates
AGENCY APPROVAL
- FCC part 15,
Class A and Part 68
- Industry
Canada CS03
- UL and CUL
ENVIRONMENT
- Operating: 0°
to 50° C (32° to 122° F)
- Storage: -20°
to 70° C (-4° to 158° F)
- Relative
Humidity: Up to 95%, non-condensing
PHYSICAL
- Dimensions:
10.4"D x 8.0"W x 2.4"H
- Weight: 4.5
lbs.
- Power: 115 VAC,
60 HZ, 7 W
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. |
Ordering Information
- FSU - 1200130L1
- FSU w/56/64k DSU/CSU
- 1200130L2
- V.35 Adapter Cable
Male 6 ft. - 1200193L1
- V.35 Adapter Cable
Female 6 ft. - 1200194L1
|
