| |
This product has been discontinued and
available in a newer model at our
netperformer website
|
ACT
Networks� SDM-9350 multi-service integrated
access device is a packetized voice and data
solution, and a key component of the NetPerformer
family � a suite of products that has been
optimized for the needs of complex, distributed
networks. Typically these networks include a
wide variety of data and telephony requirements,
with various sites needing differing amounts of
functionality, density and performance.
The SDM-9350 is designed for the branch office
that needs cost-effective voice transport back
to corporate headquarters. By packetizing and
compressing voice traffic, then delivering it in
combination with data over a Frame Relay
network, the SDM-9350 allows companies to save
money on their monthly telephony service.
The SDM-9350 provides two analog voice ports
which can be configured for E&M (Types I, II
and V), FXS and FXO. The unit is expandable to
four voice ports, and LAN interfaces such as
Ethernet and Token Ring can also be added.
Fractional T1 and E1 connections to the WAN are
also available.
Each unit comes standard with four serial ports
allowing aggregation of Frame Relay connections.
This means that a company�s existing routers
can be integrated and fully supported,
protecting previous investment of network gear.
And, of course, NetPerformer�s
comprehensive routing and protocol suite can
also be used to directly provide the routing
functionality.
|
|
FEATURES & BENEFITS |
Integrated
voice and data capability
� in a compact design make the SDM-9350 an ideal
solution for the needs of the branch office wishing to
save money on telephony costs to headquarters. The
SDM-9350, in conjunction with the rest of the NetPerformer
product line, allows each individual site to be
configured with just the right combination of services,
performance and scalability, avoiding unnecessary cost.
Support for modem and fax � means the SDM-9350
can support all the telephony needs of today�s
distributed enterprise networks, saving cost by
integrating all types of traffic onto a single network.
Any-to-any voice switching � integrates the
disparate phone systems of individual sites. This
eliminates the need for consistency among sites, saving
cost and increasing flexibility.
Adherence to standards � lets the SDM-9350
seamlessly integrate with any public network, and
ensures compatibility with leading Frame Relay switches
The SDM-9350 supports PowerCell � ACT�s
award-winning technology for voice and data integration
and prioritization. This allows the entire network to
operate at optimal performance for all supported traffic
types.
SNMP-compliant MIBs and graphical management �
through ACTview 2000, including integration with Hewlett
Packard�s OpenView for Windows 95/NT, let the SDM-9350
be managed using today�s most popular and universal
network management system.
|
SPECIFICATIONS |
| System
Details: |
- System
Details
- Desktop
or rackmount chassis
- Power:
90 to 264 VAC 50/60 Hz
- Number
of serial ports: 4
- Serial
connector: MD-26
- Interface:
RS-232C, X.21/V.11, RS-530, RS-449/RS-442, V.35 (CE
mark), software configurable
- Analog
voice: 2 voice/fax channels on base unit, up to 4
with voice expansion card
- Number
of expansion slots: 2
|
Expansion Options: |
- MOD-VC-01:
2 analog interfaces: FXS, FXO, E&M 4w/2w (types
I, II and V), AC-15 software configurable
- LAN
(maximum one per unit):
- MOD-ETH-01:
Ethernet (10Base2/10BaseT)
- MOD-TR-01:
Token Ring (4/16 Mbps)
- WAN:
T1/E1 CSU/DSU single and dual ports
- Fractional
T1/E1 CSU/DSU: G.703/704
- Single
and dual port models
- 32
logical ports
- Drop
and insert on dual ports
- RJ48
connectors for T1 and E1 120 ohms
- BNC
connectors for E1 75 ohms
|
Network
Connections: |
- Circuits:
leased, switched or Frame Relay
Link port protocols:
- Synchronous
full duplex HDLC, frame relay RFC-1490, user-UNI,
network-UNI, PowerCell
- Link
port speed: 9.6Kbps to 2.048Mbps
- Frame
Relay:
- Local
management I/F: LMI, ANSI T1.617 / Annex D, ITU-T
Q.933 / Annex A, CLLM or disabled
- PVCs:
96 per node
|
Telephony Features: |
- Voice
compression algorithms: ACELP 8Kbps, 5.8Kbps,
4.8Kbps, ACELP Comfort Noise 8Kbps, 6Kbps, ADPCM
G.726, PCM G.711
- Fax
support: Group III at 2.4, 4.8, 7.2, 9.6, 12 and
14.4Kbps
- Modem
Relay: V.32bis modulation up to 14.4Kbps
- Impedance:
600/900 ohms or complex
|
LAN Support: |
- Ports:
1 Ethernet or 1 Token Ring
- Protocol
support:
- Standards:
IP RIP v2 or Static, BootP/DHCP relay, OSPF, IPX
RIP and SAP, Source Routing, Source Routing
Transparent
- 802.1D
Spanning Tree Protocol (STP), MAC Layer,
Transparent Bridging
- Filter
criteria: Based on protocol, address (source,
destination or SAP) or custom filtering
- 8
classes of service, 16 priority weights
|
Data Features (Non-LAN): |
- Data
Features (Non-LAN)
- User
port maximum speed: 2.048Mbps
- User
port protocols:
- SNA:
SDLC, LLC2 or Frame Relay RFC1490 (BAN, BNN),
maximum of 64 PUs per data module (types 1, 2.0,
2.1, 4/5), local SDLC and LLC2 spoofing, SDLC/LLC2
conversion
- Legacy
Sync: BDLC, HDLC, SDLC, X.25, X.25 over Frame Relay
(annex F/G), COP, BSC, DDCMP, VIP, ALC, IBM/RJE,
Uniscope, Poll/Select, Siemens Nixdorf, JCA, Zengin
- Frame
Relay: RFC-1490, UNI-DTE, UNI-DCE
Asynchronous: ENQ/ACK, XON/XOFF, transparent, CTS/DTR
- 8
classes of service, 16 priority weights
|
Physical Characteristics: |
- Height:
2.5� (6.4 cm)
- Width:
17� (43.2 cm)
- Depth:
12.5� (31.8 cm)
- Weight:
11 lbs. (5 kg)
- Shipping
weight: 16 lbs. (7.3 kg)
|
Environmental Tolerance: |
- Operating
Temperature: 0� � 45� Celsius
- Relative
Humidity: 10% � 90%, non-condensing
|
| Emissions
and Immunity: |
- EN
55022: 1995
- EN
50082-1: 1992
- EN
60555-2 / -3 : 1987
- AS/NZS
3548
- CE
Mark: EC Directive 89/336/EEC, 'Electromagnetic
Compatibility Directive'
|
Safety Compliance: |
- UL
1950
- CSA
C22.2 No. 950
- ACA TS
001 � 1996
- EN
60950 : 1992 / A1 : 1993 / A2 : 1993 / A3 : 1995
- CE
Mark: EC Directive 73/23/EEC, 'Low Voltage
Directive'
|
Network Compliance: |
- I-CTR
2
- TS 002
- TS 003
- FCC
Part 68
- IC
CS03
- CE
Mark: EC Directive 98/13/EEC, �Telecommunications
Terminal Equipment Directive�
|
CE Marking: |
- EC
Directive 93/465/EEC, 'CE Marking Directive'
|
Network Management: |
- SNMP
management via ACTview 2000 Network Management
System for HP OpenView
- Menu
driven async console port (VT-100) via DB9 male
connector, autosensing DTE/DCE
- Remote
Telnet access to command port
- FTP
upload and download of software and
configuration
- Traps,
traces and extended statistics
- Username/password
security control, administrative filtering
|
|
|
